SKF 24184 ECA/C3W33 spherical roller bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Spherical roller bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 24184 ECA/C3W33
- 241Series
- Spherical roller bearings, 241 series. Series differ in outside diameter and width even when the bore is the same.
- 84Bore
- Bore 420 mm (84 × 5).
- ECA/C3W33Suffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
24184 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 24184 ECA/C3W33 measures 420 mm across the bore and 700 mm across the outside diameter; its width is 280 mm (420 x 700 x 280 mm).
SKF 24184 ECA/C3W33 belongs to spherical roller bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 24184 ECA/C3W33 and any equivalents.
SKF spherical roller bearings handle radial and axial loads in both directions and can compensate for misalignment between shaft and housing. They suit heavy-duty equipment where shaft deflection or mounting inaccuracies occur. MR Industrial Accessories supplies this line and offers technical guidance to select the correct execution.
The series designation combines a four- or five-digit basic number with suffixes ECA/C3W33. The basic number indicates size and load capacity; for example, 24088 ECA/C3W33 and 24176 ECA/C3W33 differ in diameter and dimension series. The ECA suffix denotes an internal design with stamped steel cage and cylindrical bore. C3 means internal radial clearance greater than normal. W33 identifies a lubrication groove and holes in the outer ring. These codes let you order the exact bearing for your application.
Typical industries include cement, mining, steel, paper, wind power, and earthmoving. You will find them in crushers, mills, conveyor belts, large centrifugal pumps, industrial fans, and road machinery. Their self-aligning ability makes them suitable for long shafts or shafts subject to deflection, where rigid bearings would suffer stress concentration. They also work in combined-load and moderate-speed applications.
Selection depends on radial and axial load, speed, required internal clearance, and lubrication type. Choose C3 when fits are tight or operating temperature reduces clearance; W33 simplifies relubrication through the outer ring. During mounting, verify initial alignment, seat cleanliness, and heating method to avoid damage. Use lubricant suited to temperature and load, and protect with seals against contamination.
Spherical roller bearings follow international standards for dimensions and tolerances, so different brands are dimensionally interchangeable. However, internal suffixes can vary: the same size may have different cage, clearance, or lubrication designs. Always confirm the complete part number and service conditions before replacing one brand with another.
For a quote on this series, send the full part number via WhatsApp to MR Industrial Accessories. We help you choose the right execution and respond promptly.
Dimensions
420 x 700 x 280 mm (d x D x B): boundary dimensions for basic designation 24184, according to ISO 15.
- Bore
- 420mm
- Outside diameter (D)
- 700mm
- Width (B)
- 280mm
Same size, other brands
Other brands' pages with basic designation 24184: 420 x 700 x 280 mm (d x D x B) per ISO 15.
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 24184 ECA/C3W33 bearing: what are its dimensions?
- SKF 24184 ECA/C3W33 measures 420 mm across the bore and 700 mm across the outside diameter; its width is 280 mm (420 x 700 x 280 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 24184.
- What does the C3 suffix indicate?
- C3 indicates internal radial clearance greater than normal. It is specified for tight fits, temperature differences between rings, or high speeds to prevent clearance from becoming too small during operation.
- What is the purpose of the W33 groove and holes?
- W33 means the outer ring has a lubrication groove and holes, allowing relubrication from the housing without dismounting the bearing. This simplifies maintenance on hard-to-reach equipment.
- How do I request a quote for an SKF bearing?
- Send the complete bearing part number, for example 24088 ECA/C3W33, and the quantity you need via WhatsApp. MR Industrial Accessories will reply with a quote and possible alternatives.