SKF 229750 J/C3R505 spherical roller bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Spherical roller bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SKF 229750 J/C3R505 belongs to spherical roller bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 229750 J/C3R505 and any equivalents.
When a shaft flexes or the housing seats are not perfectly parallel, a self-aligning bearing keeps the application running. SKF spherical roller bearings use two rows of rollers that oscillate, so they tolerate angular misalignment between shaft and housing. Typical equipment includes conveyors, mills, pumps and gearboxes. We supply the SKF line and help you pin down the exact part number so the bearing you receive matches what the machine needs.
The part number tells you how the bearing is built. Take 229750 J/C3R505: the basic number covers dimensions and series, J points to a stamped steel cage, C3 means radial internal clearance above normal, and R505 is a manufacturer-defined special treatment or lubricant. Order by the complete designation exactly as it appears on the drawing or the old nameplate.
These bearings show up in food processing, cement, mining, paper and material handling. You will find them in belt conveyors, mills, mixers, centrifugal pumps, fans and gearboxes. Because they carry radial and axial loads in both directions while allowing oscillation, they suit shafts that bend and mountings that are not perfectly aligned.
Selection comes down to load, speed, internal clearance and sealing. C3 clearance helps when temperature differs between shaft and housing. The J steel cage works for many duties; where vibration or shock is present, a machined cage may be the better choice. During mounting, keep everything clean, align the components and lubricate correctly. In split housings, check the fit and the seal to keep contamination out.
SKF spherical roller bearings interchange with other European, Asian and American brands that share the same standardized dimensions. Interchange depends on bore, outer diameter and width, but suffixes differ from one maker to another. When replacing, compare clearance, cage and sealing as well as dimensions. If anything is unclear, send us the original part number and we will help you find the equivalent.
Need this bearing? Send the complete part number through WhatsApp or email and our team will reply promptly with a quote. If the number is worn off or you want an alternative, we can also advise you on the right option.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does C3 mean on a spherical roller bearing?
- C3 indicates radial internal clearance larger than normal. It is chosen when temperature differences between shaft and housing exist, or when extra clearance is needed to offset mounting fits.
- How can I identify the part number without the original?
- Measure bore, outer diameter and width with a caliper, then check bearing tables. You can also send photos and measurements via WhatsApp and we will help you match the SKF part number.
- Can SKF bearings be replaced with other brands?
- Often yes, if the standardized dimensions match. Suffixes can differ between manufacturers, so verify internal clearance, cage type and sealing before substituting.