SKF 2207 E-2RS1TN9/W64 self-aligning ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Self-aligning ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 2207 E-2RS1TN9/W64
- 22Series
- Self-aligning ball bearings, 22 series. Series differ in outside diameter and width even when the bore is the same.
- 07Bore
- Bore 35 mm (07 × 5).
- E-2RS1TN9/W64Suffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
2207 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 2207 E-2RS1TN9/W64 measures 35 mm across the bore and 72 mm across the outside diameter; its width is 23 mm (35 x 72 x 23 mm).
SKF 2207 E-2RS1TN9/W64 belongs to self-aligning ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 2207 E-2RS1TN9/W64 and any equivalents.
Series 22 self-aligning ball bearings from SKF are double-row units whose outer ring features a spherical raceway. This design lets the bearing compensate for small angular misalignments between shaft and housing, which is useful when shaft deflection or mounting inaccuracies are present. They run with low friction and are suited to high-speed operation.
The part number tells you what you are getting. The basic number, such as 2202 or 2207, sets the size and dimension series. An E suffix means the internal design has been optimized for higher load capacity. 2RS1 indicates rubber seals on both sides, keeping lubricant in and contaminants out. TN9 is a glass fiber reinforced polyamide cage, which is lightweight and resistant. /W64 points to a special lubrication for particular conditions. Together, these suffixes describe a sealed bearing intended for maintenance-free use.
These bearings are found in transmission equipment, fans, centrifugal pumps, conveyors and agricultural machinery. Their self-aligning ability is valuable on long shafts or shafts that bend, where a rigid bearing would introduce parasitic loads. They are also selected for vibrating applications or where the mounting structure may deform. Because they are sealed, they handle dusty or moderately humid environments, as long as they are not submerged.
Selection depends on radial and axial load, rotation speed and shaft diameter. Make sure the housing permits self-alignment: the outer ring must be free to move angularly. During mounting, do not strike the seals and keep shaft and housing clean. The /W64 suffix defines the lubrication; do not mix it with other greases. At high speed, confirm that the polyamide cage suits the operating temperature.
When replacing, self-aligning ball bearings from different brands with the same basic designation usually interchange in dimensions and load capacity. Suffixes, however, can differ: a 2RS seal from one maker may correspond to 2RS1, 2RSR or similar in another. Do not assume suffixes are identical; check the manufacturer's specifications. MR supplies SKF as a brand and can advise on a suitable equivalent for your equipment.
To replace a self-aligning ball bearing, send the complete code by WhatsApp. The MR team helps you pick the correct variant for your application, with experience in power transmission and bearings for US and Latin American industry.
Dimensions
35 x 72 x 23 mm (d x D x B): boundary dimensions for basic designation 2207, according to ISO 15.
- Bore
- 35mm
- Outside diameter (D)
- 72mm
- Width (B)
- 23mm
Same size, other brands
Other brands' pages with basic designation 2207: 35 x 72 x 23 mm (d x D x B) per ISO 15.
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 2207 E-2RS1TN9/W64 bearing: what are its dimensions?
- SKF 2207 E-2RS1TN9/W64 measures 35 mm across the bore and 72 mm across the outside diameter; its width is 23 mm (35 x 72 x 23 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 2207.
- What does the suffix 2RS1 mean on an SKF bearing?
- 2RS1 means the bearing has rubber seals on both sides. These seals retain grease and block dust and moisture, so the bearing is factory-lubricated and needs no additional maintenance.
- Can I replace an SKF self-aligning ball bearing with another brand?
- Usually yes, if the main dimensions and load capacity match. But suffixes can change between manufacturers. Verify that sealing, cage and lubrication are equivalent so performance is not compromised.
- Where are series 22 self-aligning ball bearings used?
- They are used in equipment with shafts that may bend or misalign, such as fans, pumps, conveyors and agricultural machinery. Their self-aligning capability reduces parasitic stresses and extends the service life of the assembly.