SKF 2202 E-2RS1TN9/GFJ self-aligning ball bearing
- Brand
- SKF
- Category
- Bearings
- Subcategory
- Self-aligning ball bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Decoding SKF 2202 E-2RS1TN9/GFJ
- 22Series
- Self-aligning ball bearings, 22 series. Series differ in outside diameter and width even when the bore is the same.
- 02Bore
- Bore 15 mm: by standard, 02 designates 15 mm.
- E-2RS1TN9/GFJSuffix
- SKF suffix: identifies the variant, such as seals or shields, cage, internal clearance or other features.
2202 is the standard ISO basic designation, which sets the bearing type, series and bore.
Description
SKF 2202 E-2RS1TN9/GFJ measures 15 mm across the bore and 35 mm across the outside diameter; its width is 14 mm (15 x 35 x 14 mm).
SKF 2202 E-2RS1TN9/GFJ belongs to self-aligning ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 2202 E-2RS1TN9/GFJ and any equivalents.
SKF E series self-aligning ball bearings have a double row of balls and a spherical raceway that lets them compensate for small misalignments between shaft and housing. They handle moderate radial and axial loads and are a practical choice when mounting conditions are less than perfect. MR Industrial Accessories supplies this line to keep your equipment running.
The part number follows SKF nomenclature: the basic number (such as 2202 or 2205) gives the size and diameter series. The E suffix denotes an optimized internal design. 2RS1 means rubber seals on both sides, which keep grease in and contaminants out. TN9 is a glass-fiber reinforced polyamide cage, light and tough. /GFJ specifies a factory grease for particular temperature and speed ranges. Reading these codes helps you order the exact replacement.
These bearings suit equipment where shafts flex or housings are not perfectly aligned. They appear in industrial fans, conveyors, textile machinery, packaging lines and small drives. Their self-aligning ability reduces premature wear and simplifies maintenance when alignment is not ideal.
When selecting, consider radial and axial load, speed and environment. The 2RS1 seal works in moderate dust or humidity. The TN9 cage handles vibration well. During mounting, ensure shaft and housing are clean and free of burrs; initial alignment need not be perfect, but avoid impacts that damage seals. The GFJ grease is factory-applied, so no additional lubrication is needed.
For replacement, equivalent bearings from other brands may exist with similar designations, but always verify main dimensions, seal type and cage match. At MR Industrial Accessories we help you confirm safe interchangeability without affecting performance.
To request a quote for SKF E series self-aligning ball bearings, send the full part number, quantity and working conditions via WhatsApp or email. Our team replies promptly and can suggest equivalents and help you choose. MR Industrial Accessories serves customers across the United States and in several Latin American countries.
Dimensions
15 x 35 x 14 mm (d x D x B): boundary dimensions for basic designation 2202, according to ISO 15.
- Bore
- 15mm
- Outside diameter (D)
- 35mm
- Width (B)
- 14mm
Same size, other brands
Other brands' pages with basic designation 2202: 15 x 35 x 14 mm (d x D x B) per ISO 15.
- FAG2202-TVH2202-2RS-TVH
- NSK2202
- NTN2202S
What they share are the ISO 15 boundary dimensions, not the specs: seals or shields, internal clearance, cage and load rating may vary with brand and suffix. Every quote is by full part number.
Frequently asked questions
- SKF 2202 E-2RS1TN9/GFJ bearing: what are its dimensions?
- SKF 2202 E-2RS1TN9/GFJ measures 15 mm across the bore and 35 mm across the outside diameter; its width is 14 mm (15 x 35 x 14 mm). Those are the boundary dimensions standardized in ISO 15 for basic designation 2202.
- What does the 2RS1 suffix mean on these bearings?
- It indicates rubber seals on both sides. These seals retain lubricating grease and block dust, water or particles, extending service life in contaminated environments.
- Can I replace an SKF bearing with another brand?
- Yes, if the main dimensions, seal type and cage match. Check the dimensions and ask us with the original part number to ensure a correct equivalent.
- Do I need to lubricate the bearing before mounting it?
- No, these bearings come lubricated from the factory with GFJ grease. Mount them clean and avoid blows that could damage the seals. Do not add extra lubricant.