SKF 212-Z deep groove ball bearing

SKF 212-Z belongs to deep groove ball bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 212-Z and any equivalents.

SKF 60 series deep groove ball bearings are thin-section components designed to handle radial and axial loads in both directions. They come with Z or 2Z shields that help keep lubricant in and particles out. Typical uses include electric motors, pumps, fans, and light-duty transmissions. MR Industrial Accessories supplies these bearings and assists you in selecting the right part number.

The part number tells you the size and shield type. The basic number (e.g., 6000, 6001, 6002) identifies the 60 series, known for its thin cross-section. Suffixes indicate shielding: Z means a metal shield on one side, 2Z means shields on both sides. For instance, 6000-2Z has two shields, while 6000-Z has one. These shields are not hermetic seals; they simply limit contaminant entry and grease loss.

In US industry, these bearings are common in low- to medium-power electric motors, centrifugal pumps, fans, small compressors, machine tools, and transmission equipment. They also appear in automotive components like alternators and tensioners. Their compact size and ability to run at moderate to high speeds suit equipment where space is tight and maintenance is minimal.

When selecting a bearing, consider radial and axial loads, speed, and environmental conditions. The 60 series has a thin section, so it carries less load than other series but permits higher speeds. For dusty or moist environments, choose Z or 2Z shielded versions. During installation, verify shaft and housing alignment, and avoid hitting the shields. Factory lubrication typically lasts for the bearing's life, but demanding applications may require relubrication.

When replacing a bearing, you may find equivalents across brands. The part numbers of the 60 series with Z and 2Z suffixes are standard and often interchangeable among manufacturers that follow the same dimensions. However, always check tolerances and internal clearance, as they can differ. At MR Industrial Accessories, we supply SKF and can advise on interchangeability.

To request a quote for an SKF 60 series deep groove ball bearing, send the part number via WhatsApp. With the full designation, such as 6003-2Z, we can identify the product and respond quickly. We can also help if you need an alternative or are replacing an existing bearing. Contact us for assistance in finding the right solution for your equipment.