SKF 1726209-2RS1 y-bearing (insert bearing)

SKF 1726209-2RS1 belongs to y-bearing (insert bearing), part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 1726209-2RS1 and any equivalents.

The SKF Y-bearing is an insert bearing with a spherical outer ring that mounts in split plummer block or pillow block housings to create a ready-to-run unit. The bore is secured to the shaft with set screws or an eccentric collar, depending on the model. Its self-aligning capability handles minor misalignment, making it a practical choice for power transmission, conveying and material handling equipment where assembly and maintenance need to be straightforward.

In the 2RS1 series, the basic number indicates the insert size and design, while the 2RS1 suffix denotes double nitrile contact seals on both sides. This sealing arrangement keeps dust, chips and splashes out and retains the factory-filled grease. As a rule, higher numbers in the series correspond to larger bore diameters and greater load capacity.

Typical applications include belt conveyors, bucket elevators, mixers, screens, packaging lines and agricultural machinery. They are often found in food processing, cement, quarrying and logistics operations where dust or humidity is present and frequent relubrication is not practical. Woodworking, ceramics and aggregate processing equipment also use them, always mounted in split plummer block or pillow block housings that MR Industrial Accessories supplies together with the bearing.

When selecting a Y-bearing, confirm the shaft diameter and the fixing method: some models use set screws on the inner ring, others an eccentric collar. The 2RS1 seal suits dirty environments or washdown areas; for heavy water exposure, additional housing covers may be needed. During mounting, align the housing with the shaft, tighten the screws with the correct wrench and avoid striking the outer ring. Bearings come pre-lubricated, but in service it is wise to inspect the seal and relubricate if the housing allows it.

Interchangeability is based on bore diameter, width and fixing type. Brands use different nomenclatures, so equivalence is determined by comparing those dimensions and the sealing style, not just the code. If you have the old number from the bearing or housing, send it and we can identify the equivalent reference within the SKF line we supply.

To replace a Y-bearing, send the complete code by WhatsApp or email to MR Industrial Accessories. With the number and a photo of the housing, we can confirm the reference and prepare your quote.