SKF 110X135X12 CRW1 V radial shaft seal

SKF 110X135X12 CRW1 V belongs to radial shaft seal, part of our Seals range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 110X135X12 CRW1 V and any equivalents.

SKF CRW1 V radial shaft seals are single-lip, spring-loaded seals that keep lubricant in and contaminants out of rotating shaft applications. The part number itself carries the key dimensions and construction details, so you can identify a seal quickly from the designation. MR Industrial Accessories LLC supplies this line to customers in the United States and Latin America, and can help you confirm the right reference for your equipment.

Reading the code is straightforward. In a reference such as 12X32X7 CRW1 V, the first numbers give bore 12 mm, outside diameter 32 mm and width 7 mm. The CRW1 portion describes the lip design and body material, and the trailing V means the seal has a secondary exclusion lip. The same pattern applies to 17X28X7 CRW1 V and 20X35X7 CRW1 V: dimensions first, then the letters that define how the seal is built.

You will find these seals in pumps, electric motors, gear reducers, transmission boxes and process equipment. They also appear in agricultural machinery and material handling systems, and in food, chemical, petrochemical and metalworking plants where dust, water or chips must be kept away from the bearing cavity. Their job is twofold: stop oil or grease from escaping and block particles that would otherwise speed up wear on shafts and bearings.

When selecting a seal, check the shaft diameter, the housing bore and the width you have available. The lip needs a ground, lubricated surface to run on; a scratched or worn track will leak early. Shaft-to-housing alignment also matters, because misalignment beyond the permissible range shortens seal life. At installation, lubricate the lip with the same oil used in the equipment, avoid impacts, and confirm the spring is seated correctly. In very dusty environments, a version with an additional exclusion lip is worth considering.

SKF seals can be interchanged with other manufacturers' seals that follow the same standardized dimensions. When replacing, compare lip type, material and service temperature as well as dimensions. A seal with an exclusion lip can replace a simple one if there is room, but not the reverse. For high peripheral speeds or extreme temperatures, check the compound limits. MR Industrial Accessories LLC can help you find a suitable equivalent.

To request a quote for an SKF CRW1 V series radial shaft seal, send the complete part number by WhatsApp or email. With your shaft and housing data, the team will confirm the exact reference and advise on installation.