SEALMASTER VF2S-40MM flange bearing 2 holes
- Brand
- SEALMASTER
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- VF2S 200
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SEALMASTER VF2S-40MM belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for VF2S-40MM and any equivalents.
The SEALMASTER VF2S 200 series is a two-bolt flange mounted unit that pairs a cast iron housing with a ball insert bearing. It bolts to a flat surface and supports shafts in applications where space is limited and a rigid mounting is required. The series covers shaft diameters from 20 to 55 mm.
The part number breaks down into three elements: VF stands for two-bolt flange, 2S denotes the housing style, and the number after the hyphen gives the shaft diameter in millimeters. The MM suffix confirms the metric size. For example, VF2S-20MM through VF2S-55MM. Ordering that complete code gets you the full assembly: housing and insert together.
These units are common on belt conveyors, bucket elevators, mixers, mills, and other process equipment. The two-bolt flange design allows mounting directly to sheet metal or structural frames without machining. They are also used when replacing an original mounted unit on older machinery with an equivalent.
When selecting, consider shaft diameter, load type, and operating environment. The insert seal determines suitability for dust, water, or frequent washdowns. Before tightening the bolts, check flange alignment and internal clearance. Lubrication is typically permanent, but seal condition should be inspected periodically.
Interchange between brands is based on series and size: a two-bolt flange unit with a 20 mm insert can be replaced by another brand offering the same configuration. Shaft diameter alone is not sufficient; compare bolt hole spacing, hole diameter, and insert mounting style. MR can indicate a compatible alternative for the part number you need.
To request a quote for a SEALMASTER VF2S 200 series flange bearing, send the part number via WhatsApp or email. We will quote the size shown on your equipment or suggest an equivalent. Our team also answers technical questions on mounting and replacement.
Dimensions
- Número de producto
- 32648
- Bore
- 40 mm
Frequently asked questions
- What does the code VF2S-20MM mean?
- VF indicates a two-bolt flange, 2S is the housing type, and 20MM is the shaft diameter in millimeters. It follows the SEALMASTER VF2S series nomenclature. That part number identifies the complete unit: housing plus insert bearing.
- How do I choose the right flange unit for my shaft?
- Measure the shaft diameter and the distance between the flange holes. Consider the environment: dust, water, or frequent washdowns call for better sealing. If unsure, send us the equipment part number and we will advise.
- Can it be replaced by another brand?
- Yes, if the shaft diameter, bolt hole spacing, and insert mounting type match. The nominal size alone is not enough. MR can indicate a compatible alternative for the part number you send via WhatsApp.