SEALMASTER VE-132S insert bearing
- Brand
- SEALMASTER
- Category
- Bearings
- Subcategory
- Y-bearing (insert bearing)
- Series
- VE 100
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SEALMASTER VE-132S belongs to insert bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for VE-132S and any equivalents.
A ball bearing with an extended inner ring, the SEALMASTER VE series insert is made to sit in split housings and wall units. It suits shafts that turn and need compact support, with sealing built in and the choice of set screw locking. Light and medium-duty drives are where this insert is most often found.
Reading the code starts after the letters: the digit that comes first tells you the diameter series, and the two digits after it give the size inside that series. A trailing S marks a design variant, usually tied to how the insert is sealed or locked. Before picking a part number, have two things ready: the shaft diameter and the housing it will go into.
Typical installations include belt conveyors, bucket elevators, mixers, mills and process equipment in food, chemical and materials plants, plus agricultural machinery and packaging lines. Because the housing is split, service work can be done without pulling the whole shaft apart.
When selecting, confirm the inner ring bore matches the shaft and that the housing takes the matching VE series. Look at the surroundings as well: where dust or moisture is present, a contact lip variant is the better choice. Align the housing during mounting, then bring the set screws down onto the shaft with a torque wrench following the manufacturer's figure. Apply lithium grease before start-up.
Inserts in the SEALMASTER VE series can stand in for other brands that share the same series and diameter naming. A replacement from another maker works if the shaft diameter, inner ring width and locking method all line up. Ask our team about the equivalent that fits your case.
To get a quote on a SEALMASTER VE insert bearing, send the full part number over WhatsApp or email, for example VE-120S or VE-220S. We can also point you to the right housing and the lubrication that suits your application.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the S suffix mean in part numbers VE-120S and VE-220S?
- Within the VE series, the S marks a design variant, normally connected to the sealing type or the locking system of the insert. Send us the complete reference on WhatsApp and we will confirm the exact feature of your part number.
- Can I replace an insert bearing from another brand with a SEALMASTER VE?
- Yes, provided the shaft diameter, inner ring width and locking type match. The VE series is interchangeable with other brands using similar nomenclature. Give us the original part number and we will identify the compatible alternative.
- What lubrication is advisable for a VE insert bearing?
- General-purpose lithium grease, applied before mounting and renewed according to the duty cycle, is the usual choice. For humid environments or high temperatures, ask us about a grease suited to that case.