SEALMASTER USRBE5000-208 pillow block bearing
- Brand
- SEALMASTER
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- USRBE5000
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SEALMASTER USRBE5000-208 belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for USRBE5000-208 and any equivalents.
The SEALMASTER USRBE5000 is a mounted pillow block: an insert bearing fitted into a cast housing that bolts down through two base holes. It carries rotating shafts in conveying, transmission and process machinery where the bearing needs firm support and protection from dirt and moisture.
Reading the code helps when you order. USRBE points to the pillow block family that uses an insert bearing, and the letters that follow describe how the housing is made and how it is sealed. The 5000 block is the dimensional series, while the three digits at the end tell you the shaft size the insert is bored for, so USRBE5000-115 and its neighbors differ only in that bore.
You will find these units on belt conveyors, bucket elevators, mixers, blowers, centrifugal pumps and packaging lines. They suit food processing, cement, leather, meatpacking and water treatment plants, plus material handling and farm equipment, as long as the load is radial and moderate and shaft speed stays in the medium range.
Two checks drive selection. First, confirm the shaft diameter your equipment needs and the mounting style: the USRBE5000 bolts down on two base holes with the shaft running parallel to the mounting surface. Second, look at the insert sealing. Labyrinth and oil seals keep out dust and liquids; where washdown is routine, extra protection is worth considering.
Pillow blocks from different makers can be swapped when shaft diameter, center height, hole spacing and mounting type line up. SEALMASTER, SKF, Timken, NTN and Dodge often list dimensionally equivalent series, though housing tolerances and sealing arrangements differ. A replacement works if you verify mounting dimensions and load capacity first.
Send the full part number by WhatsApp or email and our team will quote it, suggest equivalents and help you pick the right unit.
Dimensions
- Número de producto
- 198786
- Bore
- 2 1/2 in
Frequently asked questions
- What does the suffix in USRBE5000-115 mean?
- The three-digit suffix gives the shaft size the insert bearing is machined for. Each part number in the USRBE5000 series corresponds to a different shaft diameter.
- How can I tell if another brand's pillow block will interchange?
- Match shaft diameter, center height, base hole spacing and mounting type. When those agree, the unit can be interchanged. Keep in mind that tolerances and sealing systems may differ between manufacturers.
- What lubrication does the insert bearing need?
- The insert arrives pre-lubricated. Still, check the grease condition before mounting and relubricate according to operating conditions. Shorten intervals in dusty or humid settings. Use a grease compatible with the seal and avoid mixing different types.