SEALMASTER USFB5000-112 flange bearing 4 holes
- Brand
- SEALMASTER
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- USFB5000
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SEALMASTER USFB5000-112 belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for USFB5000-112 and any equivalents.
The SEALMASTER USFB5000 is a four-bolt flange mounted bearing unit. It holds a rotating shaft to a flat surface where the shaft runs perpendicular to the mounting plane. The flange spreads the load across four points, so the unit handles moderate radial and axial loads. MR Industrial Accessories supplies this line and helps you select the right size.
The code breaks down into two parts. USFB names the family of flange bearing units with a mounted bearing. The 5000 block is the construction series. After the hyphen, the digits give the shaft size and housing layout, as seen in USFB5000-107, USFB5000-108 and USFB5000-207. For that reason, always order with the complete part number so the flange, insert and diameter are identified without confusion.
Typical applications include belt conveyors, bucket elevators, mixers, blowers and process lines in food, chemical and aggregate plants. The four-bolt flange mounts to sheet metal or structural profiles, and the shaft exits perpendicular to the mounting face. This layout makes alignment easier in compact equipment.
Selection depends on shaft diameter, load type and site conditions. The insert seal determines how well the unit keeps out dust and moisture; in dusty areas a tighter seal is the better choice. Use the lubricant specified for the mounted insert and renew it according to the operating regime. During installation, set the flange on a clean, flat surface, tighten the four bolts in a cross pattern, and confirm the shaft turns without side stress.
Flange mounted bearing units come from several brands, each with its own nomenclature. They do not interchange automatically: compare shaft diameter, hole spacing, center height and insert type. The practical step is to send your mounting dimensions and the original brand so a compatible option can be identified. MR Industrial Accessories will point out which choice fits your equipment.
To replace a SEALMASTER USFB5000 or find an alternative, send the full part number by WhatsApp or email. With that information the team can quote the correct variant and advise on mounting and lubrication. They can also help when the bearing unit is part of equipment that calls for a special configuration.
Dimensions
- Número de producto
- 100921
- Bore
- 1 3/4 in
Frequently asked questions
- What does the code USFB5000-107 mean?
- USFB is the family of flange bearing units with a mounted bearing; 5000 is the construction series, and the digits after the hyphen define shaft size and housing configuration. Send the full part number to identify the exact variant.
- How do I choose between the different sizes in the USFB5000 series?
- You need the shaft diameter, the flange hole spacing and the center height. With those dimensions we compare the series variants and tell you which one fits. The original part number is even more helpful.
- What lubrication does a flange mounted bearing unit require?
- The insert is greased at the factory and needs replenishment based on the operating regime and environment. In dusty or wet areas, a grease with good water resistance is advisable, and the seal should be checked. We will guide you for your application.