SEALMASTER TFT-20RT flange bearing 2 holes
- Brand
- SEALMASTER
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- TFT-T
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SEALMASTER TFT-20RT belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for TFT-20RT and any equivalents.
This assembly pairs a cast iron 2-bolt flange housing with a SEALMASTER insert bearing. It supports rotating shafts where the mounting surface is flat and two fastening points are used. MR Industrial Accessories LLC supplies this line to industrial plants across the United States and several Latin American countries.
Reading the TFT-T code helps you specify the right unit. TFT identifies the 2-bolt flange housing family with insert bearing; the final T denotes the housing variant. The number that follows, as in TFT-20RT, gives the insert size and the shaft diameter it fits. The RT suffix defines the sealing and locking arrangement of the insert. Send the complete code and we will quote that exact reference.
These housings are common on belt conveyors, packaging lines, mixers, blowers, centrifugal pumps and process lines in food, chemical and materials plants. The 2-bolt flange mounts on folded sheet metal or profile structures and aligns more easily than a pillow block housing.
Selection starts with shaft diameter and load type: radial, axial or combined. Match the insert sealing to the environment—dust, humidity or washdown—and specify internal clearance if the shaft runs hot. During mounting, set the flange on a clean, flat surface, tighten bolts in a cross pattern, and check alignment with a straightedge or dial indicator. Lubricate the insert with the specified grease and inspect seals periodically.
Flange dimensions and shaft diameters for insert bearing housings are standardized across brands, so units can be interchanged when series and locking type match. A similar code is not enough: compare hole spacing, shaft diameter and locking system. If you have the original code, send it via WhatsApp or email and we will identify a compatible alternative.
MR Industrial Accessories LLC supplies the SEALMASTER line of insert bearing housings. For a specific TFT-T size, send the complete code via WhatsApp or email for a prompt quote. We can also advise on insert, sealing or lubrication for your application.
Dimensions
- Bore
- 1 1/4 in
Frequently asked questions
- What does the code TFT-20RT mean?
- TFT identifies the 2-bolt flange housing with insert bearing, 20 is the insert size, and RT is the sealing and locking configuration. Provide the complete code and we will quote the exact reference.
- How do I choose the housing for my shaft?
- Start with shaft diameter and load type. Check the working environment to define sealing, and ask about internal clearance if the equipment runs at elevated temperature. With that data we will point you to the right variant.
- Can it be replaced by another brand?
- Yes, when flange dimensions, shaft diameter and locking system match. Do not rely on the code alone: compare hole spacing and locking type. Send us the original code and we will suggest a compatible alternative.