SEALMASTER SRP-18 pillow block bearing

SEALMASTER SRP-18 belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SRP-18 and any equivalents.

The SEALMASTER SRP series is a foot-mounted pillow block that pairs a cast housing with a self-aligning insert bearing. It carries rotating shafts where the load is mostly radial and small misalignments have to be absorbed. MR Industrial Accessories LLC supplies this line as part of its power transmission range for customers in the United States and Latin America.

Reading the code is straightforward. SRP points to a pillow block family built around an insert bearing, and the digits that come after it tell you which shaft size the unit fits. That is how SRP-8, SRP-10, SRP-12, SRP-14, SRP-15, SRP-16, SRP-18 and SRP-19 sit in the same series at different shaft sizes. Housing and insert arrive together, ready to bolt down.

You will find these units on belt conveyors, bucket elevators, mixers, mills, screens and other process equipment in food, chemical, cement and aggregate operations, including humid or dusty areas. The foot-mount pattern suits frames and structures built from sheet metal or profile, and the insert can be swapped out without pulling the whole shaft apart.

Selection comes down to three things: shaft diameter, whether the load is radial, axial or combined, and what the surroundings look like. The insert seal determines how well the unit stands up to dust, water or washdown chemicals, so a heavier seal makes sense in tough conditions. Follow the lubricant specified for the unit and refresh it according to the duty cycle. Getting the pillow block aligned at installation and torquing the mounting bolts properly keeps parasitic stresses out and helps the bearing reach its expected service life.

Y-bearing pillow blocks from one brand often swap with another once the critical dimensions line up: shaft diameter, hole spacing, height to center and the way the shaft is secured. When you ask for a quote, give the complete part number and, where you have them, the housing and shaft dimensions. MR Industrial Accessories LLC can point you to a compatible option among the brands it carries while keeping the original equipment performing as intended.

For a Y-bearing pillow block on a specific machine, send the part number or the shaft dimensions to MR Industrial Accessories LLC by WhatsApp or email. The team replies promptly, suggests equivalents and helps with assembly and lubrication questions so the unit runs under the conditions it was chosen for.