SEALMASTER SFT-32R flange bearing 2 holes

SEALMASTER SFT-32R belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SFT-32R and any equivalents.

The SEALMASTER SFT is a two-bolt flange housing that comes with an insert bearing, designed to support rotating shafts on flat surfaces. Its cast iron body and sealed insert make it a practical choice for conveying and transmission equipment where radial loads and moderate axial thrust are present. Installation is straightforward: the flange bolts to a flat structure, and alignment is fine-tuned during mounting.

The series code SFT identifies a two-bolt flange housing with insert bearing. The number that follows indicates the shaft diameter the insert fits: for example, SFT-20R and SFT-32R. The trailing R denotes the mounting variant. To choose the correct unit, start with the shaft diameter and confirm the bolt spacing on the flange. If you are unsure about the code, send us the model from your equipment and we will help you identify the right one.

These housings are common in belt conveyors, bucket elevators, mixers, fans, and process lines across food, chemical, and aggregate plants. The two-bolt flange allows mounting on sheet metal or profiles without machining. The cast iron housing and sealed insert handle dust and moisture typical of these environments. When selecting, consider whether the load is mainly radial or includes axial thrust, and verify that the mounting surface is flat and clean with enough space for the bolts.

The insert typically arrives pre-lubricated. Under high temperature or heavy contamination, replenish lubrication according to the duty. During installation, tighten the flange screws in a cross pattern and check that the shaft rotates smoothly without hard spots.

SFT housings can interchange with other two-bolt flange mounted bearing lines that share the same bolt spacing and shaft diameter. However, interchangeability is not always direct: seal type, internal clearance, and shaft fastening method may differ. If you have a part number from another brand, send it to us and we will indicate a compatible SEALMASTER alternative or one that suits your equipment.

MR Industrial Accessories supplies the SEALMASTER line and manufactures split plummer block housings, roller chains, and sheaves. To request a quote for an SFT housing or a complete unit with insert bearing, contact us via WhatsApp or email with the part number SFT-20R, SFT-32R, or the model shown on your equipment. Our team responds promptly and can suggest equivalents and assist with selection.