SEALMASTER SFT-27 flange bearing 2 holes
- Brand
- SEALMASTER
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SFT
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SEALMASTER SFT-27 belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SFT-27 and any equivalents.
The SEALMASTER SFT is a two-bolt flange bracket that comes with an insert bearing already fitted into a cast iron housing. It supports shafts where the mounting surface is vertical and space is tight, and it simplifies alignment because the flange bolts directly to a wall or frame.
The SFT code points to a specific series of two-bolt flange brackets. The number after the hyphen tells you the insert size: SFT-8, SFT-10, SFT-12, and so on are progressively larger within the same family. Each code is a complete assembly, so the housing and insert are matched to one shaft diameter. To order a replacement, send the full code through WhatsApp or email.
You will find these brackets on conveyors, mixers, fans, belt drives, and process lines where the shaft is supported from a vertical face. They are a practical answer when there is not enough room for a floor-mounted unit. The two-bolt pattern holds the bracket against the structure and keeps the insert centered on the shaft.
Selection depends on shaft diameter, load direction, and the conditions around the equipment. The insert seal determines whether the bracket can handle dust, moisture, or washdown. Lubrication has to suit the speed and operating temperature. During installation, check that the flange sits flat and tighten the bolts evenly so the housing does not distort and the shaft stays aligned.
SEALMASTER SFT brackets can replace other two-bolt flange mounted bearings when the shaft diameter, hole spacing, and insert locking method are the same. Equivalence is confirmed by matching the designation and key dimensions, not by the code alone. If you are replacing a bracket from another line, send the code and dimensions and we will point you to the compatible option.
To get a quote, message us the full code (for example, SFT-10) or the shaft diameter and flange dimensions. We reply promptly and can also help you choose the insert and seal for your working environment.
Dimensions
- Bore
- 1 11/16 in
Frequently asked questions
- What does the SFT designation mean in a flange bracket?
- SFT identifies the series of two-bolt flange brackets with insert bearing. The number after the hyphen gives the insert size, such as SFT-8 or SFT-12. Send the complete code and we will quote it.
- How do I know if an SFT bracket replaces the one I have mounted?
- Check the shaft diameter, the distance between the flange holes, and how the insert locks to the shaft. With those dimensions and the current code, we can suggest a compatible alternative.
- What should I take into account to mount an SFT bracket?
- Make sure the flange seats flat, tighten the bolts evenly, and verify shaft alignment. The insert seal and lubrication must be suitable for the working environment.