SEALMASTER SFT-24C CR flange bearing 2 holes
- Brand
- SEALMASTER
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- SFT-C CR
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SEALMASTER SFT-24C CR belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SFT-24C CR and any equivalents.
SEALMASTER SFT-C CR series covers two-bolt flange housings that hold a mounted bearing and fasten a rotating shaft to a flat surface. They suit arrangements where the shaft runs at a right angle to the mounting face and where the support has to stay rigid while still allowing alignment. MR Industrial Accessories LLC supplies this line in a range of shaft sizes for industrial duty.
Read the code from left to right. SFT places the unit in the two-bolt flange housing family, C marks the construction variant inside that family, and CR identifies the sealing or protection arrangement. The figure in each reference, as in SFT-12C CR or SFT-20C CR, points to a particular shaft size, so the full code pins down one size and one configuration.
Typical duties include conveying, ventilation, agitation and general transmission. You will find these housings on conveyor belts, mixers, centrifugal pumps, exhaust fans and food and beverage machinery. Bolting the flange to sheet metal or a steel structure lets you set the orientation precisely, which matters when the shaft has to sit square to the support plane.
Selection comes down to shaft diameter, load type and the conditions around the equipment. The CR sealing in this series holds lubricant in and keeps dust and moisture out. At mounting, line up the flange holes with the support surface and check that the bearing sits fully seated. Correct lubrication and a fit free of imposed stress both help the assembly last.
If you are comparing other brands, look at the series, flange style, hole count and shaft diameter side by side. Standard dimensions often open the door to a compatible unit, but confirm the critical dimensions before you swap one out. We can point you to a compatible alternative or quote a special configuration if your setup calls for one.
Send the housing code by WhatsApp or email and our team will get back to you promptly with a quote. Ask as well about other sizes in the SFT-C CR series or about flange housings with different sealing arrangements. Give us the code or model and we will answer on the technical side, directly.
Dimensions
- Bore
- 1 1/2 in
Frequently asked questions
- How is the SFT-C CR code put together?
- SFT is the two-bolt flange housing family, C is the construction variant and CR is the sealing type. The number in each reference, such as SFT-12C CR, stands for a specific shaft size in the series.
- What should I check to pick the right housing?
- Look at shaft diameter, load type and ambient conditions. Confirm flange alignment and that the bearing is seated. Send the code by WhatsApp if you want help choosing.
- Can you suggest an alternative if my size is not listed?
- Yes. We handle the SEALMASTER line and other compatible options. Message us on WhatsApp with the code or the dimensions and we will point you to a suitable alternative.