SEALMASTER SFT-20RT flange bearing 2 holes

SEALMASTER SFT-20RT belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SFT-20RT and any equivalents.

This SEALMASTER SFT-T series unit is a 2-bolt flange housing with an insert bearing, built to support and align rotating shafts on a flat mounting surface. The shaft runs parallel to the mounting plane, making it a good fit for compact, low-profile installations that need a rigid connection. The flange bolts directly to sheet metal, machine beds, or gearboxes, and the insert includes sealing for dusty or moderately wet conditions.

The part number tells you what you are holding. SFT identifies the 2-bolt flange housing with insert bearing. The T is the series variant. The number after it, as in SFT-20RT or SFT-32RT, gives the insert size and therefore the shaft diameter. The RT suffix covers the insert configuration and its sealing. With that complete code, you can specify the housing without guessing at the mounting style or size.

You will find these units on belt and roller conveyors, packaging lines, elevators, mixers, blowers, and continuous process lines. They also show up in food plants, meat processing, water treatment, mills, and facilities that use pressure washing or steam. The 2-bolt flange mounts easily on folded sheet metal and lets you pull the shaft without tearing down the whole assembly. It is a practical choice when space is tight and the fastening has to stay firm.

Selection comes down to three things: the insert shaft diameter, the load type (radial, axial, or combined), and the environment. The insert seal determines whether the housing handles dust, water, or frequent washdowns. In humid areas, keep lubrication in good condition and relubricate on a regular schedule. During mounting, set the flange on a clean, flat surface, tighten the bolts in a cross pattern, and check shaft alignment with the rest of the drive. Poor alignment will shorten insert bearing life.

For equivalents, 2-bolt flange housings with insert bearings interchange between brands by shaft number and flange configuration, but hole pattern, thickness, and sealing type do not always match. Compare the complete part number and critical dimensions before replacing. We can point you to a compatible alternative with the same mounting dimensions.

To request a quote for your SFT-T housing with insert bearing, send the part number from the equipment, such as SFT-20RT or SFT-32RT, or the shaft diameter and bolt hole spacing of the flange. We sell SEALMASTER and other lines of housings and mounted bearings, and we will reply promptly with a quote or a suitable equivalent.