SEALMASTER SFT-207TMC flange bearing 2 holes

SEALMASTER SFT-207TMC belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SFT-207TMC and any equivalents.

The SEALMASTER SFT-T series 2-bolt flange Y-bearing is a mounted unit that pairs a cast housing with an insert bearing. It mounts flush to a flat surface with two bolts, guiding rotating shafts where alignment must be centered and maintenance access is important. MR Industrial Accessories supplies this unit with technical support to help you select the correct size.

The part number breaks down into meaningful segments. SFT indicates the 2-bolt flange housing, T denotes the mounting variant, and the number that follows gives the nominal shaft diameter. For example, SFT-204TMC and SFT-205TMC are different sizes in the same family, while SFT-210TMC and SFT-211TMC cover larger shafts. The TMC suffix identifies the sealing and insert attachment configuration. Using the complete part number ensures you specify the exact size.

These units are found in belt and roller conveyors, mixers, mills, bucket elevators, centrifugal pumps, and process equipment in food, chemical, and aggregate plants. They also appear in industrial fans and blowers. They suit applications where a compact flange is needed and the shaft runs perpendicular to the mounting surface.

When selecting, begin with the shaft diameter and the load type: radial, axial, or combined. Confirm that the flange has sufficient space for the two fastening holes and that the mounting surface is flat and clean. The insert typically arrives pre-lubricated. In service, monitor the sealing, operating temperature, and exposure to dust or moisture. During installation, align the shaft with the unit and tighten the fastening bolts evenly to avoid deforming the housing.

Flange Y-bearings are offered by various brands under their own nomenclatures. Interchangeability depends on shaft diameter, hole spacing, flange diameter, and insert attachment type, not just the part number. If the equipment carries another brand, compare these critical dimensions before replacing. MR Industrial Accessories can suggest a compatible alternative within the SFT-T series or other equivalent lines.

If you have the part number or shaft size, send it via WhatsApp or email for a prompt quote. We can also assist if you need a sealing variant, a flange with different hole spacing, or a split plummer block housing from our own manufacturing. Provide equipment data and a photo of the mounting, and our technical team will define the best option for your application.