SEALMASTER SF-211TMC flange bearing 4 holes
- Brand
- SEALMASTER
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SF-T
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SEALMASTER SF-211TMC belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SF-211TMC and any equivalents.
The SEALMASTER SF-T series 4-bolt flange Y-bearing unit pairs an insert bearing with a flange housing that bolts to flat surfaces. It provides firm support for rotating shafts and allows the insert to be aligned or replaced without taking apart the surrounding structure. You will find it on agricultural machinery, conveyors and other industrial equipment.
Read the code in three parts. SF tells you it is a 4-bolt flange housing. T is the housing variant with its own series characteristics. The digits that follow, as in SF-204TMC or SF-208TMC, set the insert bearing size and the shaft diameter it fits. The MC suffix points to the sealing type and insert configuration. With this nomenclature you can match the housing to your shaft and operating conditions.
Typical installations include belt and roller conveyors, grain elevators, mixers, mills, food processing lines, chemical plant equipment, fans, pumps and transmission systems. The 4-bolt flange pattern makes mounting on walls or frames straightforward, and the insert absorbs small misalignments. For selection, look at shaft diameter, radial and axial loads, and the environment. The insert seal matters: dusty, wet or washdown areas call for the configuration that gives the bearing the most protection. When mounting, keep the support surface clean and flat, and tighten the fastening bolts evenly to prevent distortion. Follow the manufacturer's lubrication specification, and relubricate on schedule to extend the life of the assembly.
Interchangeability between brands is possible when the key dimensions line up: shaft diameter, bolt hole spacing, bolt hole diameter and overall height. It is not automatic, because sealing, insert locking and load capacity can differ from one series to another. Check the actual dimensions or ask a specialist before swapping one component for another.
To request a SEALMASTER SF-T series 4-bolt flange Y-bearing unit, send the part number or model and the shaft size to MR Industrial Accessories on WhatsApp or by email. The team replies promptly, can suggest equivalents and will help you pick the option that fits your equipment.
Dimensions
- Número de producto
- 32648
- Bore
- 55 mm
Frequently asked questions
- What does SF-T mean in SEALMASTER housings?
- SF stands for a 4-bolt flange housing and T for the housing variant. The numbers after it, such as in SF-204TMC, indicate the insert bearing size and shaft diameter. The MC suffix identifies the insert sealing type.
- How do I select the right housing?
- Start with the shaft diameter, the loads and the working environment. Sealing is critical where dust or moisture is present. With that information, we can recommend the configuration that suits your equipment.
- Can 4-bolt flange housings be interchanged between brands?
- Sometimes, if the mounting dimensions and shaft diameter match. Differences in sealing, insert locking and load capacity can prevent a direct swap. Verify the actual dimensions or consult us with the part number.