SEALMASTER SEHB-47 hanger bearing
- Brand
- SEALMASTER
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- SEHB
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SEALMASTER SEHB-47 belongs to hanger bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SEHB-47 and any equivalents.
The SEALMASTER SEHB is a hanger bearing housing that combines a cast iron housing with an insert bearing. It mounts suspended from a structure rather than on a base, so the shaft can turn at an intermediate support point while staying clear of the surrounding equipment. Typical positions are overhead conveyors, process lines and similar drives where a foot-mounted unit will not fit.
The SEHB code covers a family of hanger housings with insert bearings. The digits after the hyphen give the housing and insert size, so SEHB-15, SEHB-16, SEHB-17, SEHB-19, SEHB-20, SEHB-21, SEHB-22 and SEHB-23 each match a different shaft size. Every part number is therefore a specific pairing of shaft diameter and mounting arrangement. Send the full number and our team will confirm the exact variant.
You will find these units in food processing, cement, mining, chemical and material handling plants: belt and overhead conveyors, bucket elevators, mixers, dryers and packaging lines. Their job is to hold the shaft at an intermediate point, let it rotate with low friction and absorb slight misalignment. Where dust, moisture or washdown is present, the insert seal becomes the deciding factor and extra protection may be needed.
Selection starts with shaft diameter, then load type (radial, axial or combined) and the operating environment. Check that the housings line up with each other and that lubrication suits the duty. For high temperature or high speed shafts, contact us and we will point you to a compatible alternative.
SEALMASTER SEHB housings can interchange with other mounted bearing brands that use the same basic dimensions and fixing style. Shaft diameter, distance between mounting centers and fixing type all have to match, and not every part number crosses over, so verify critical dimensions before replacing. Send the original number and we will help you identify the right option.
MR Industrial Accessories supplies the SEALMASTER line and can advise on the hanger housing that fits your equipment. Send the SEHB part number you need by WhatsApp or email and we will respond promptly. If the exact variant is not clear, write to us with the model or dimensions and we will suggest a compatible alternative.
Dimensions
- Bore
- 2 15/16 in
Frequently asked questions
- What does SEHB mean in a hanger bearing housing?
- SEHB identifies a family of SEALMASTER hanger bearing housings with insert bearing. The number after the hyphen indicates the housing and insert size, which corresponds to a specific shaft size. Send us the complete part number and we will confirm the exact variant.
- How do I choose the right SEHB housing for my application?
- You need the shaft diameter, the type of load and the environmental conditions. The insert sealing and lubrication are key depending on the environment. Tell us how your equipment operates and we will indicate the compatible option.
- Are SEHB housings interchangeable with other brands?
- They may be compatible with other mounted bearing brands if the basic dimensions and mounting configuration match. Always verify the shaft diameter and the distance between centers. With the original part number we will help you find the equivalent.