SEALMASTER MSFT-19 flange bearing 2 holes
- Brand
- SEALMASTER
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- MSFT
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SEALMASTER MSFT-19 belongs to flange bearing 2 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for MSFT-19 and any equivalents.
The SEALMASTER MSFT series is a two-bolt flange mounted bearing unit that pairs a self-aligning insert with a cast housing. It supports shafts where the mounting surface is flat and the fixing holes are aligned. MR Industrial Accessories supplies this line for maintenance and purchasing teams across the United States and Latin America.
The MSFT code groups several two-bolt flange housings. The number after the hyphen is the shaft size the insert fits, so references such as MSFT-15, MSFT-16, MSFT-19 and MSFT-20 all belong to the same family but cover different shaft diameters. When you request a quote, that suffix is the key detail: it is not a housing dimension but the identifier of the insert-and-housing assembly.
These units are common on belt conveyors, bucket elevators, mixers, screens and process lines in food, chemical and aggregate plants. The two-bolt flange lets you bolt the housing to a frame or structural plate with straightforward alignment. Fans and horizontal-shaft pumps that need a support with some angular tolerance also use them.
Selection starts with the shaft diameter given in the part number. Then check the insert fixation: set screws, eccentric collar or taper sleeve, each with a different mounting procedure. Match the insert sealing to the environment; dust, water or frequent washdowns call for more closed labyrinths or seals. During installation, set the flange on a clean, flat surface, tighten the screws in a cross pattern and confirm the shaft turns freely. Lubricate the insert with compatible grease and avoid overfilling.
Interchange between brands of mounted housings depends on flange dimensions, shaft diameter and insert type, not on the commercial part number. An MSFT of a given size can be replaced by an equivalent housing from another maker if hole spacing, center height and fixation system match. Compare drawings or measure the old housing to confirm. MR can suggest a compatible alternative when you provide those dimensions or the original part number.
If an MSFT housing is needed for equipment that is down, send the complete part number on WhatsApp, for example MSFT-23 or MSFT-27, and the team will quote it promptly. A photo of the housing and the flange dimensions also works if the reference is not at hand. MR supplies the SEALMASTER line and equivalent alternatives to keep the assembly running.
Dimensions
- Bore
- 1 3/16 in
Frequently asked questions
- How do I identify the correct MSFT housing size?
- The number after MSFT indicates the insert shaft size. Measure the shaft diameter at the mounting point and send that value or the full part number, such as MSFT-19. With that information MR can quote the exact reference.
- How does a flange housing differ from a pillow block?
- A flange housing is fastened with screws to a flat surface, with the holes aligned in the housing. A pillow block sits on a base and places the shaft at a higher position. The choice depends on the space and the equipment frame.
- Can an MSFT housing be replaced by a housing from another brand?
- Yes, provided the shaft diameter, flange hole spacing, center height and insert fixation type match. Send those dimensions or the original part number and MR will indicate a compatible alternative.