SEALMASTER MH-16T insert bearing
- Brand
- SEALMASTER
- Category
- Bearings
- Subcategory
- Y-bearing (insert bearing)
- Series
- MH-T
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SEALMASTER MH-16T belongs to insert bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for MH-16T and any equivalents.
The SEALMASTER MH-T series insert bearing is a single row bearing with an extended inner ring. It mounts into split or pillow block housings to create a mounted bearing unit, supporting rotating shafts in conveyors, fans and other plant machinery. MR Industrial Accessories supplies this line and assists with selecting the correct code for your application.
The MH-T designation breaks down as follows: M and H, then a number indicating the insert size, and finally T. Examples include MH-16T, MH-19T and MH-20T, each covering a different shaft diameter within the same family. The T suffix denotes a construction variant, while the central number orders sizes from smallest to largest. When ordering a replacement, provide the complete code from the tag or machine drawing.
Typical industries using these inserts include food, beverage, logistics, cement and aggregate processing. They appear in belt conveyors, bucket elevators, mixers, blowers, packaging lines, washing equipment and machines with drive shafts that need robust support and tolerance to contamination. The series offers a range of sizes selected by shaft diameter and housing type.
Selection depends on shaft diameter, housing type and fastening method: some inserts use set screws, others an eccentric collar. Check sealing, since dusty or humid environments may require additional protection. During mounting, align housing and shaft, lubricate as applicable and tighten fastening screws with the proper wrench. Poor alignment or uneven tightening shortens bearing life.
For equivalences, MH-T inserts can interchange with other brands sharing the same shaft diameter and fastening type, but always verify housing and outer ring dimensions. A similar code is not enough: outer diameter, width and lubrication hole position must match. If unsure, send a photo and key measurements, and we will identify a compatible alternative.
MR Industrial Accessories supplies the SEALMASTER brand within its bearings and mounted units range. For an MH-T insert, contact us via WhatsApp or email with the code or model from your machine. We respond promptly and, when needed, advise you to ensure the replacement is correct.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- How do I determine which MH-T series code I need?
- Measure the shaft diameter where the insert mounts and compare it with the series table. You can also read the code engraved on the old part. If you cannot find it, send a photo and measurements via WhatsApp and we will help identify it.
- Can I replace an insert from another brand with a SEALMASTER MH-T?
- Yes, provided the shaft diameter, outer diameter, width and fastening system match. Do not rely only on the code; verify dimensions. Send us the measurements and we will indicate the compatible equivalence.
- What care does mounting an insert bearing require?
- Align the housing with the shaft, lubricate the insert according to the sealing type and tighten fastening screws evenly. Avoid striking the outer ring during mounting. Correct alignment and even tightening extend bearing service life.