SEALMASTER 6TF16 take-up bearing
- Brand
- SEALMASTER
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
- Series
- TF
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
SEALMASTER 6TF16 belongs to take-up bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for 6TF16 and any equivalents.
A take-up unit from the SEALMASTER TF series keeps proper tension on chain and belt drives. It mounts on the slack side of the system, where its position can be shifted to take up stretch and wear. The design handles dusty, damp and variable-load conditions found in heavy industrial work.
Reading the code helps you order the right unit. The leading figure points to the insert bearing size, the letters TF mark the take-up family, and the trailing figure covers the mounting or sealing variant. So 6TF16 and 9TF16 carry the same 16 suffix but take different shaft diameters, while 12TF31 and 18TF39 step up in the first figure as load capacity rises. Have the shaft diameter and mounting style ready when you look up a number.
Typical duty covers chain conveyors, bucket elevators, belt conveyors and drive trains in food, cement, mining and logistics operations. The unit soaks up vibration and holds alignment while tension is reset on a maintenance schedule, and its seals suit dusty or humid plants.
Selection comes down to shaft diameter, radial load and the surrounding conditions. The insert seal has to match the site: a labyrinth seal protects better than a simple seal where dust or liquid is present. Line the unit up with the drive, set tension within the allowable load, keep it lubricated and check clearance at intervals.
SEALMASTER TF units can replace other brands built to the same mounting standard and dimensions. Compare shaft diameter, the distance between mounting centers and the insert type rather than trusting the part number alone, since not every number crosses over. Send the original number or your measurements and the team will point to a compatible option.
To request a quote, send the full part number by WhatsApp or email. If the exact variant is unclear, share the model or shaft dimensions and the team will suggest equivalents and help with the selection. MR Industrial Accessories LLC serves customers across the United States, Canada, Mexico and South America.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the designation 6TF16 mean?
- The first number gives the insert bearing size, TF identifies the take-up unit series and the last number defines the mounting or sealing variant. Check the shaft and mounting dimensions against the series table to read each part number correctly.
- When should I use a take-up unit instead of a fixed unit?
- A take-up unit sits on the slack side and regulates chain or belt tension. A fixed unit only carries the shaft. Where stretch or wear has to be compensated, a take-up unit such as the TF series is the choice.
- Can SEALMASTER TF series units replace other brands?
- Yes, provided the shaft diameter, distance between mounting centers and insert type match. Verify the dimensions instead of relying on the part number alone. If in doubt, send the measurements and the team will indicate the equivalent.