Coupling RUADIGON X-11 (X-95) — Coupling with solid hubs
- Brand
- RUADIGON
- Category
- Power transmission
- Subcategory
- Couplings
- Series
- X
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
RUADIGON X-11 · Acople con mazas llenas belongs to coupling, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X-11 · Acople con mazas llenas and any equivalents.
The RUADIGON X-11 is a shaft coupling with solid hubs, built to transmit torque between two connected shafts. Its model designation is X-11, and it corresponds to the X-95 reference. MR Industrial Accessories supplies this coupling as part of its power transmission range. For help matching it to your equipment, send the part number and your shaft dimensions through WhatsApp or email.
The X-11 uses solid hubs at both ends, meaning there are no internal cavities in the hub bodies. This design produces a rigid connection that handles torsional loads well. Because there are no flexible elements inside, the coupling does not absorb significant misalignment, so the shafts must be lined up carefully during installation. The payoff is a simpler assembly with fewer points that can wear.
Typical applications include pumps, fans, conveyors, mixers, and machine tools running in continuous rotation. These are drives where alignment is already reasonable and a firm mechanical link is preferred. If your existing equipment carries an X-95 coupling, the X-11 is the equivalent replacement.
When selecting a coupling of this type, gather the shaft diameter and length at both ends, the keyway dimensions, and the nominal torque of the drive. Also note the operating speed and the environment: temperature, dust, or moisture may call for extra protection. During assembly, check alignment with a dial indicator or a straightedge and feeler gauge before tightening the hubs. Poor alignment will accelerate wear on bearings and seals.
If you need a replacement from another brand, send the full part number from the component or the manual. With that and your shaft measurements, we can search for an alternative in the RUADIGON line or suggest a compatible option. We can also help if the original coupling is no longer available and a similar model must be adapted. Accurate information speeds up the process.
To request a quote for the RUADIGON X-11 coupling or ask about the X-95 equivalent, contact us on WhatsApp with the part number and shaft dimensions. We handle technical inquiries and help you identify the right option for your equipment. We can also check for alternatives in the same coupling category. Send your data and we will follow up.
Dimensions
- Model
- X-11
- Equivalent to
- X-95
- Component
- Coupling with solid hubs
Frequently asked questions
- Is the X-11 the same as the X-95?
- Yes, model X-11 is equivalent to X-95. They are the same part with different commercial designations. To confirm compatibility, compare shaft and keyway dimensions before replacing.
- What does it mean that it has solid hubs?
- It means the hubs at both ends are solid, without internal cavities. That provides greater rigidity and torsional strength. It does not compensate for large misalignments, so shaft alignment must be careful.
- How do I request a different size or an equivalent?
- Send us on WhatsApp the part number stamped on the part, the equipment model, and the shaft measurements taken with a caliper. With that data we look for an alternative within the RUADIGON line or a compatible replacement.