Skip to main content
All products
Rubber elastic coupling with textile reinforcements and metal flanges at both ends · RUADIGON X-7 · Banda elástica
Coupling RUADIGON X-7 (X-60) — Flexible element

RUADIGONBrand We Carry

Coupling RUADIGON X-7 (X-60) — Flexible element

Manufacturer part numberX-7 · Banda elásticaAlso known as: X7·Bandaelástica · X 7 · Banda elástica
Subcategory
Couplings
Series
X
Get a quote for X-7 · Banda elástica on WhatsApp

We reply promptly.

Tell us the quantity you need and request a quote by WhatsApp or email.

Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.

Ask on WhatsAppAsk by email

Description

RUADIGON X-7 · Banda elástica belongs to coupling, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for X-7 · Banda elástica and any equivalents.

The elastic band is the flexible member of the RUADIGON X-7 coupling, also designated X-60. Mounted between the hubs, it carries torque across the coupling while allowing a degree of misalignment and softening vibration. This listing covers the band only; hubs and other coupling parts are ordered separately. MR Industrial Accessories supplies it as part of its RUADIGON coupling range.

The band sits between the two hubs and is the element that actually transfers motion, so it is the part that wears first. If the coupling has to be renewed, this is usually the component to replace. For material and dimensional confirmation, refer to the manufacturer's data sheet or send the part number and we will check it against your coupling.

Elastic couplings of this type appear on centrifugal pumps, fans, compressors, conveyors and machine tools. The band passes torque from the motor to the driven machine while taking up shock loads, cutting the vibration that reaches the other side of the drive, and absorbing small angular, radial and axial offset between shafts. Keeping those offsets away from the bearings and seals is what protects them over time.

Selection starts with the coupling model, X-7 or X-60, followed by hub size and the duty conditions: torque, speed and temperature. The band must match the coupling it goes into; a mismatched band will not seat correctly and will fail early. At installation, confirm the hubs are aligned and that the band sits without being forced into place. A band showing cracks, cuts, permanent set or loss of elasticity should come out before it damages the rest of the coupling.

For a band that fits another RUADIGON model, send the full coupling part number, or the hub and band measurements, and we will look for the equivalent. If compatibility between models is unclear, we can review it with you. MR Industrial Accessories works in power transmission and can point you to the right replacement component.

Quotes for the RUADIGON X-7 (X-60) elastic band, part number RUADIGON-X60-BE, and for other sizes are handled by WhatsApp or email. Send the part number and we will come back with the information your equipment needs.

Dimensions

Model
X-7
Equivalent to
X-60
Component
Flexible element

Frequently asked questions

Does this band fit the RUADIGON X-60 coupling?
Yes. The X-7 band is the equivalent for the X-60, and it is the flexible part of that coupling. If you are unsure, send us the coupling part number and we will confirm.
What information do you need to supply a replacement band?
The coupling model, X-7 or X-60, and the full part number if you have it. Without the number, a photo or the hub and band measurements are enough for us to identify the replacement.
How can I tell the band is worn?
Look for cracks, cuts, permanent deformation or a band that has lost its elasticity. Unusual vibration or noise from the coupling points the same way. When in doubt, replace it before further damage occurs.
Get a quote for X-7 · Banda elástica on WhatsApp
Quote on WhatsApp