RKB NUP 29/600 cylindrical roller bearing
- Brand
- RKB
- Category
- Bearings
- Subcategory
- Cylindrical roller bearings
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
RKB NUP 29/600 belongs to cylindrical roller bearing, part of our Bearings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for NUP 29/600 and any equivalents.
The RKB NUP series is a cylindrical roller bearing built for radial duty, and its internal geometry also lets it handle combined forces and tilting moments. Where a machine needs stiffness and accurate running, such as machine tools, gearboxes and transmission systems, this design is a common choice. MR Industrial Accessories LLC supplies this series and quotes it against the reference or dimensions you provide.
Reading the code helps you identify what you are ordering. NUP describes the ring arrangement: the inner ring carries two flanges, while the outer ring has one flange plus a retaining ring. That layout permits axial location in both directions and allows the assembly to be mounted and removed axially. The digits that follow point to the dimension series; in NUP 29/600, the 29/600 segment identifies a particular outside diameter and width series.
Typical service is in metallurgy, cement, mining and food processing plants. You will find these bearings in speed reducers, gearboxes, industrial pumps, fans and machine tools. Because they take heavy radial loads at moderate speeds, they suit rotating equipment working under severe conditions.
Selection comes down to radial and axial load, rotation speed and the environment around the bearing. Check shaft-to-housing alignment at assembly, since misalignment shortens service life. Grease or oil lubrication must be right for the duty, and sealing against contaminants matters just as much. Internal clearance and fits should follow the manufacturer's recommendations.
NUP cylindrical roller bearings from different makers can be swapped when dimensions and tolerances line up. For a replacement, compare the main dimensions and load capacities first. If you only have another brand's code, send it over and we can suggest the equivalent reference; interchangeability holds as long as the technical specifications are respected.
To get a quote on the RKB NUP bearing you need, message the complete code or the measurements on WhatsApp or by email. Our team answers promptly, can propose equivalents and can help you pick the right option for the application.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does NUP tell me about a cylindrical roller bearing?
- It describes the ring configuration: two flanges on the inner ring, and one flange plus a retaining ring on the outer ring. This gives axial location in both directions, so the bearing can carry moderate axial loads alongside radial ones.
- How do I select the correct NUP bearing?
- Start with the radial and axial loads, the operating speed and the conditions where it will run. Confirm shaft and housing dimensions, and check that lubrication and sealing suit the application. If anything is unclear, send us your application data.
- Can an RKB NUP bearing replace an NUP from another brand?
- Usually yes, provided the main dimensions and load capacities match and tolerances and specifications are respected. Send us the original code and we will quote the equivalent RKB reference.