REXNORD ZPS9200 pillow block bearing

REXNORD ZPS9200 belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for ZPS9200 and any equivalents.

The Rexnord ZPS line covers pillow block mounted bearing units in the 9000 series, built to carry rotating shafts where the support foot rests on a floor or bedplate. You will find them on conveyors, mixers, pumps and other process equipment, and their mounting tolerances keep shaft alignment straightforward. MR Industrial Accessories LLC supplies this line and helps you sort out which variant fits your shaft diameter and load case.

ZPS is the family tag for these 9000 series pillow blocks. The digits that come after it, such as ZPS9115, ZPS9200, ZPS9203, ZPS9207 or ZPS9208, sort out the different builds and sizes in the line: a higher number generally means a different base footprint, hole layout and load capability. The cleanest way to pin down the right code is to tell us the shaft diameter and how the equipment runs, and we will point you to the matching option.

Typical duty for these units includes belt and chain conveyors, bucket elevators, mixers, screens and continuous process lines, along with food, cement, mining and aggregate operations where bolting a pillow block to a steel frame or concrete pad keeps installation simple. Because the units are self-aligning, they take up small misalignments and handle moderate radial and axial loads, depending on the bearing inside.

When you size the bearing, work from the shaft diameter, the radial and axial load you expect, and the conditions around the equipment. In dusty or wet spots, look at how the bearing is sealed and how it is lubricated; where temperature or speed runs high, check internal clearance and mounting play. Lining up the base and tightening the mounting bolts evenly keeps stress off the shaft and helps the assembly last.

Rexnord ZPS 9000 series bearings can be swapped for equivalent units from other makers when the shaft diameter and mounting pattern line up. That match is not always a straight swap, since center heights, hole spacing and seal styles differ. Before you pull a bearing, compare the key dimensions and the bearing inside. Send us the original code and we will tell you what fits.

If you are replacing a Rexnord ZPS bearing or need an equivalent for your equipment, message us on WhatsApp with the code or the shaft dimensions. The team at MR Industrial Accessories LLC replies promptly, quotes the part and helps you settle on the option that suits your application.