REXNORD ZPS6125MMF flange bearing 4 holes

REXNORD ZPS6125MMF belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for ZPS6125MMF and any equivalents.

REXNORD ZPS series 4-bolt flange mounted bearings come as a complete assembly: the bearing and its housing are already matched. Typical part numbers include ZPS6080MMF, ZPS6100MMF, and ZPS6125MMF. The four digits indicate the unit size, and the MMF suffix is a required part of the identification.

The flange has four bolt holes and mounts flat against a surface that sits at a right angle to the shaft, such as a machine face, a frame, or a closure plate. Spreading the load across four points gives the unit a stable base. Because the bearing and housing arrive together, installation and replacement are simpler than handling the two components separately.

Reading the code: ZPS comes first, then a four-digit size number (6080, 6100, 6125, and so on), and finally MMF. Each step in the size number represents a different unit. Do not mistake MMF for MM, which belongs to a different unit type; always use the complete part number.

When selecting a unit, four details matter: shaft diameter, the center distance between mounting holes, the load, and the operating conditions. For a replacement, the full part number stamped on the old unit or basic measurements of the assembly are enough to match it.

Before installation, clean the mounting surface and the shaft. Slide the unit into place without hammering, then tighten the bolts evenly. Confirm that the shaft turns freely and quietly before running the machine. Follow the manufacturer's instructions for securing the unit to the shaft and for greasing.

To request a quote, send the full part number (for example, ZPS6100MMF) and the quantity by WhatsApp or email. If you have the old unit, a photo helps. Our team replies promptly and can suggest equivalents or help you choose.