REXNORD ZFS9080MM flange bearing 4 holes

REXNORD ZFS9080MM belongs to flange bearing 4 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for ZFS9080MM and any equivalents.

A Rexnord ZFS housing is a four-bolt flange mounted bearing unit. The flange face sits flat against a wall, frame or structural plate, and the shaft runs at a right angle to it. This makes the ZFS line a fit for equipment where the bearing cannot be supported on feet, and MR supplies it as part of its power transmission range for customers in the United States and Latin America.

Reading the code helps you order the right unit. ZF points to the flange housing family, S marks the mounting variant, and the four digits that follow set the size. Suffixes such as MM, seen in ZFS6035MM, ZFS6045MM and ZFS6050MM, describe the housing and sealing arrangement. Sizes are grouped under the ZF9000 and 6000 series, and every full part number stands for one construction combination. The nameplate or drawing on the machine is the safest place to take that number from.

Typical applications include belt and chain conveyors, bucket elevators, mixers, mills, centrifugal pumps and other process equipment. Food plants, cement operations, tanneries, wastewater treatment facilities and packaging lines use them where the housing bolts to a vertical or horizontal flange and carries moderate radial and axial load. They also serve older machines, where swapping the complete housing is a way to bring alignment back.

Before ordering, confirm three dimensions: shaft diameter, flange hole spacing and bolt circle diameter. Then look at sealing. Single and double lip versions differ in how they hold grease in and keep dust and water out. Internal clearance and lubrication have to suit the inserted bearing, and seals of different designs should not be mixed on the same equipment. At mounting, set the flange on a clean flat surface, tighten the four bolts in a cross pattern, and verify alignment with a straightedge or dial indicator before startup.

Housings from other brands can work in place of a Rexnord ZFS unit when flange dimensions and shaft diameter line up, but the match is not automatic. Center height, inner ring fastening and sealing can all differ, so a replacement is normally found by comparing dimensions and load capacity.

Send the complete part number to MR by WhatsApp or email and the team will come back with a quote, suggest an equivalent where one exists, and help you settle on the right choice.