REXNORD ZEP2090MM pillow block bearing
- Brand
- REXNORD
- Category
- Bearing housings
- Subcategory
- Bearing housings
- Series
- 2000
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
REXNORD ZEP2090MM belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for ZEP2090MM and any equivalents.
Rexnord ZEP MM pillow block mounted bearing units hold rotating shafts securely in conveyors, elevators, mixers and process equipment where alignment matters. MR Industrial Accessories LLC supplies this line and assists with selecting the correct variant based on shaft diameter, mounting style and operating conditions. Forward the part number by WhatsApp or email and we will respond with a quote.
Break down the ZEP MM code to understand what you are ordering. The ZEP letters denote the pillow block housing family; the following four digits encode shaft size and mounting type. In the 2000 series, ZEP2030MM, ZEP2035MM and ZEP2040MM differ in nominal diameter, while ZEP2050MM, ZEP2055MM, ZEP2060MM and ZEP2065MM step up to larger sizes. The MM suffix specifies the sealing and mounting configuration. A complete part number removes any ambiguity.
These housings appear in food and beverage, cement, mining, aggregate processing and material handling operations. Typical equipment includes belt conveyors, bucket elevators, horizontal mixers, blowers and packaging lines. The 2000 series is the most widely used because of its capacity-to-size ratio; the 5000, 6000 and 9000 series serve more demanding applications. In dusty, humid or frequently washed-down environments, review the sealing arrangement before finalizing a replacement.
Selection starts with the shaft diameter and the mounting type required by the equipment. Verify alignment between housings; an uneven base or misaligned shaft reduces bearing life. During installation, tighten bolts in stages and confirm axial clearance. Use the lubricant specified for the operating temperature and speed. Where washdowns or fine dust are present, choose the sealing that best excludes contamination. If unsure, send a photo of the housing and the engraved part number.
Mounted bearing housings interchange between brands by part number and by critical dimensions: shaft diameter, distance between mounting centers, height to center and base type. Similar part numbers are not sufficient; those dimensions and the sealing system must match. MR Industrial Accessories LLC identifies the compatible alternative, and for special parts we quote to your measurements.
MR Industrial Accessories LLC supplies Rexnord as a brand. For a ZEP MM housing, contact us by WhatsApp with the complete part number, shaft diameter or a photo of the part. We will quote promptly and help confirm the correct variant for your application.
Dimensions
- Bore
- 90.00 mm
Frequently asked questions
- How do I identify the ZEP MM housing I need?
- Check the part number engraved on the housing or on the equipment plate. If it is not visible, measure the shaft diameter and the distance between mounting holes. With that information and a photo, we will point you to the corresponding ZEP MM variant.
- What distinguishes the 2000, 5000, 6000 and 9000 series?
- Each series covers housings of different capacity and size for various shaft diameters and loads. The 2000 series is the most common; higher series are selected when the equipment demands greater robustness or operates under more severe conditions.
- Can I replace a housing from another brand with a Rexnord ZEP MM?
- Yes, by matching shaft diameter, distance between mounting centers, height to center and sealing type. Once those dimensions are verified, we will indicate the equivalent. Send the data by WhatsApp and we will quote the Rexnord option that fits your needs.