REXNORD ZB6035MM flange bearing 3 holes

REXNORD ZB6035MM belongs to flange bearing 3 holes, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for ZB6035MM and any equivalents.

The Rexnord ZB MM is a flange mounted bearing unit held by three bolts, made to carry a drive shaft on a flat face of a machine or frame. Because the load spreads over three fixing points, the assembly goes straight onto the structure without boring a cylindrical seat. It suits layouts where the shaft runs at a right angle to the mounting surface and some alignment correction is still possible.

Reading the code helps when you order. ZB marks the flange housing family; the numbers after it give size and series, and MM identifies the mounting and sealing version. Taking ZB5035MM and ZB6035MM as examples, the leading pair points to series 5000 or 6000 and the remaining digits to the shaft size the bearing takes. Series 6000 sits in the medium-duty range, while series 5000 is built more compactly. The complete code is what counts, so copy it exactly from the machine.

Typical duty covers belt and screw conveyors, bucket elevators, mixers, blowers and process lines in food, chemical and aggregate operations. A three-bolt flange mounts easily on folded sheet metal or cast iron and holds the shaft in one plane, which helps where the rear of the plate is hard to reach.

Selection starts with shaft diameter, the spacing between the flange holes and where the grease fitting sits. Sealing deserves attention: dusty or wet areas call for the version with a lip seal and extra protection. Grease on a regular schedule, avoid overfilling, and keep the bearing clearance free. Set the flange on a clean flat surface, tighten the three bolts in a cross pattern, then verify shaft alignment before running.

Rexnord and Link-Belt use shared nomenclature across many mounted housings, so equivalents from other lines are common. Shaft diameter alone does not decide interchangeability: overall height, flange diameter, hole spacing and seal type all have to be checked. A housing of comparable performance can substitute if the mounting dimensions and load capacity line up.

For ZB5035MM, ZB6035MM or any other reference in the line, send the code to MR Industrial Accessories by WhatsApp or email. We will quote it and point out a compatible alternative where one exists. Split plummer block housings and custom parts are also produced in our own manufacturing for equipment whose original spare is no longer offered. A model number or a photo of the part is enough for us to get back to you.