PIX GL-HSPC-3000 v-belt
- Brand
- PIX
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- PIX-Gallant
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
PIX GL-HSPC-3000 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for GL-HSPC-3000 and any equivalents.
The PIX GL-HSPC-3000 is a banded V-belt from the PIX-Gallant series, listed at 3000 mm. When you are replacing a belt on a multi-groove drive, matching both the part number and the length is the surest way to get the same fit. This page covers what to check before you request a quote.
Start with the marking on the belt you are removing. If it reads GL-HSPC-3000, you have a direct match in the PIX-Gallant line. If the marking is worn or unreadable, measure the outside length and compare it to the 3000 mm figure on this belt. Banded V-belts are built as a set of ribs joined into one unit, so the length and profile must line up with the drive's sheaves.
A banded belt is used where multiple V-belts run in parallel and must stay matched in length to avoid uneven loading. Check the sheave grooves for wear, and confirm the belt sits correctly before tensioning. If the old belt has no readable marking, send photos of the belt and the drive, along with any measurements you can take.
MR Industrial Accessories supplies this PIX belt to maintenance, engineering and purchasing teams across the United States, Canada, Mexico and South America. To request a quote, send the part number GL-HSPC-3000 by WhatsApp or email. If you are unsure whether this is the right belt, include the old marking and the drive details, and the team can help confirm it or suggest an equivalent.
Dimensions
- Length
- 3000mm
Frequently asked questions
- How do I confirm the PIX GL-HSPC-3000 is the right replacement?
- Check the marking on the back of the belt you are replacing. If it reads GL-HSPC-3000, it is a direct match. If not, note the length and profile from the old belt and send them with your request so the team can help confirm.
- What should I send with my quote request?
- Send the part number GL-HSPC-3000, the old belt marking if it is readable, and any drive details you have. Photos of the belt and sheaves are helpful when the marking is worn.
- Can MR help if I don't have the old part number?
- Yes. Provide the length and profile from the old belt, or clear photos and measurements, and the team can help identify a match or suggest an equivalent.