PIX GL-HSPA-2650 v-belt
- Brand
- PIX
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- PIX-Gallant
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
PIX GL-HSPA-2650 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for GL-HSPA-2650 and any equivalents.
The PIX GL-HSPA-2650 is a banded V-belt from the PIX-Gallant series, with a length of 2650 mm. If you are replacing a belt on a multi-groove drive, this page covers how to match it correctly. We carry this belt and quote by part number.
To match this belt to the one being replaced, start with the marking on the old belt. Confirm the part number GL-HSPA-2650 and the 2650 mm length, then check that the belt is a banded V-belt, not a single V-belt or a different profile. The banded construction ties the ribs together, so it must match the drive's groove count and pulley setup.
Inspect the drive before ordering. Look for worn grooves, misalignment, damaged pulleys, or failed bearings that may have caused the original belt to fail. If the drive uses multiple belts, replace the full set at the same time so the load is shared evenly. Note the part number and length from each belt on the drive.
When you request a quote, send the part number GL-HSPA-2650 and the 2650 mm length. If you are unsure, send a photo of the back of the old belt and the drive setup. Our team replies promptly by WhatsApp or email and can help confirm the right belt or suggest an equivalent.
Dimensions
- Length
- 2650mm
Frequently asked questions
- How do I confirm the PIX GL-HSPA-2650 is the right replacement?
- Check the marking on the old belt for the part number and the 2650 mm length. Confirm the type is a banded V-belt and that the profile matches your pulley grooves. If the marking is worn, send a photo of the belt and the drive.
- Can I replace just one belt on a banded drive?
- Banded V-belts are typically used in sets. Replacing only one belt can cause uneven tension and premature failure. We recommend replacing the full set and inspecting the pulleys at the same time.
- What information do you need for a quote?
- Send the part number GL-HSPA-2650 and the length 2650 mm. If you need help identifying the belt, include a photo of the back of the old belt and the drive setup. We reply promptly by WhatsApp or email.