PIX GL-H5V-1400 v-belt
- Brand
- PIX
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- PIX-Gallant
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
PIX GL-H5V-1400 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for GL-H5V-1400 and any equivalents.
The PIX GL-H5V-1400 is a banded V-belt in the PIX-Gallant series, built with a 3556 mm length. The part number and length are the two figures that matter most when you are matching a belt to a drive, so start there.
A banded V-belt ties several V-belts together into one unit, which is the usual choice where a drive carries multiple grooves and you want the ribs to stay in step. When you read the marking on the back of an old belt, note the part number and the length together; either one alone is not enough to confirm a match. The 3556 mm length on this belt is the figure to compare against what is stamped on the belt you are replacing.
If the belt has been running in a set, inspect the whole set rather than the failed belt alone. Look at the sheave grooves, check that the belts are seated evenly and confirm the drive is aligned before you order. A belt that has run hot or worn unevenly usually points to something on the drive rather than the belt itself.
Send us the part number, GL-H5V-1400, along with the length you measured or read off the old belt, and our team will confirm the belt or suggest an equivalent. A photo of the back marking and the drive helps us check it against the right profile.
Dimensions
- Length
- 3556mm
Frequently asked questions
- What does the part number GL-H5V-1400 tell me?
- It identifies this belt as a PIX-Gallant banded V-belt with a 3556 mm length. Use both the number and the length when you compare it against the belt on your drive.
- How do I confirm this is the right belt for my drive?
- Read the marking on the back of the belt you are replacing and measure its length. Send those details to our team with the part number and we will confirm the match or suggest an equivalent.
- Should I replace banded belts as a set?
- Yes. Banded belts are joined so the ribs run together, and mixing a new belt with worn ones can affect how the set seats in the grooves. Inspect the full set and the sheaves before ordering.