PIX GL-H5V-1120 v-belt
- Brand
- PIX
- Category
- Power transmission
- Subcategory
- V-belts
- Series
- PIX-Gallant
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
PIX GL-H5V-1120 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for GL-H5V-1120 and any equivalents.
This PIX GL-H5V-1120 belt is a banded V-belt from the PIX-Gallant series, with a length of 2844.8 mm. Banded V-belts are used on drives that need multiple V-belts to run as a single unit, such as those with heavy pulsating loads or vertical shaft arrangements. Confirm fit by checking the belt marking, profile, and length against your drive.
The banded construction ties two or more V-belts together with a top cover, which helps keep them from turning over or jumping off the pulley. This is common on drives where a single belt would not carry the load or where misalignment would cause individual belts to whip. Before ordering, inspect the drive for worn sheaves, proper alignment, and correct tension.
To confirm this belt fits your application, read the marking on the back of the old belt and compare it to the part number and length. The GL-H5V-1120 is 2844.8 mm long. If you cannot read the marking, measure the outside length and check the cross-section against the pulley groove. The PIX-Gallant series covers banded V-belts for industrial drives.
When replacing a banded belt, it is good practice to replace the full set at once, since mixing new and worn belts can cause uneven tension and premature failure. Send us the part number, the quantity, and a photo of the drive or the old belt marking. Our team can help confirm the right belt or suggest an equivalent.
Dimensions
- Length
- 2844.8mm
Frequently asked questions
- How do I confirm the PIX GL-H5V-1120 will fit my drive?
- Check the marking on your existing belt and match the part number and length. This belt is 2844.8 mm long. Also verify the cross-section matches your pulley groove and that the number of ribs in the band matches your sheave setup.
- Can I replace just one belt in a banded set?
- Banded V-belts are designed to run as a unit, so replacing only one belt can lead to uneven tension and faster wear. We recommend replacing the complete set at the same time.
- What information should I send for a quote?
- Send the part number GL-H5V-1120, the quantity you need, and any details about the drive or old belt marking. If you are unsure, a photo of the belt and pulley can help us confirm the correct item.