PEER ZUCHA207-22 hanger bearing
- Brand
- PEER
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
PEER ZUCHA207-22 belongs to hanger bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for ZUCHA207-22 and any equivalents.
The PEER ZUCHA hanger bearing is a mounted unit designed to support and guide rotating shafts in suspended applications. Its compact construction allows the shaft to pass through the bearing while the housing is fixed to a structure, making it suitable for conveyors, elevators, and other equipment that requires an intermediate support point.
The ZUCHA series uses a straightforward code to indicate shaft size. The number after ZUCHA corresponds to the nominal shaft diameter in inches, with a hyphen separating the series from the size. Examples include ZUCHA201-8 for a 1/2 inch shaft, ZUCHA202-10 for 5/8 inch, ZUCHA204-12 for 3/4 inch, and ZUCHA205-16 for 1 inch. This coding helps quickly identify the correct bearing for a given shaft.
These hanger bearings are commonly used in belt and chain conveyors, bucket elevators, mixers, dryers, and continuous process equipment. They are suited for environments where the shaft needs an intermediate support that can handle radial loads and some misalignment. The suspended mounting saves space and simplifies the overall structure.
When selecting a ZUCHA bearing, first confirm the shaft diameter and the locking method, which may be set screw, eccentric, or adapter. Sealing should be chosen based on the operating environment: applications with dust, moisture, or frequent washdowns require appropriate protection. Proper lubrication and careful alignment during installation help extend service life. Secure the housing to the structure with suitable fasteners and ensure the shaft rotates freely without axial binding.
PEER ZUCHA hanger bearings follow standardized dimensions, which often allows interchange with other brands using the same nomenclature. When requesting a quote, provide the complete part number and, if possible, the shaft and housing dimensions. The MR team can help verify equivalents and prevent mounting errors.
To request a quote, send the part number or shaft size via WhatsApp or email. MR responds promptly and can suggest compatible alternatives or assist with selection for your application.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- How do I read the ZUCHA bearing code?
- The code starts with ZUCHA followed by a number that indicates the shaft diameter in inches. For example, ZUCHA201-8 is for a 1/2 inch shaft, ZUCHA204-12 for 3/4 inch, and ZUCHA205-16 for 1 inch.
- What sealing options are available for dusty or wet environments?
- For dusty conditions, a lip seal or radial shaft seal is recommended to keep particles out. In humid or washdown environments, an additional seal may be needed. Contact MR with your part number for a specific recommendation.
- Can PEER ZUCHA hanger bearings replace other brands?
- Yes, hanger bearings with insert bearings typically follow standardized dimensions, allowing interchange between brands. To confirm an equivalent, provide the original part number and MR will quote a suitable option.