PEER UCT205-25mm take-up bearing
- Brand
- PEER
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
PEER UCT205-25mm belongs to take-up bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for UCT205-25mm and any equivalents.
The PEER UCT take-up housing consists of an insert bearing seated in a cast iron housing equipped with two side lugs. Its design permits axial movement, which is how chain, belt, or conveyor tension gets adjusted. Seals inside the insert keep lubricant in and dust out. Typical installations include conveyors, elevators, mills, and power transmission equipment.
The UCT prefix denotes this take-up housing style. The digits after it give the size. A code such as UCT205-25mm indicates a 25 mm shaft diameter, and UCT208-40mm indicates 40 mm. The hyphenated millimeter value states the exact shaft size, which is the critical figure when matching an insert. The line spans UCT201-12mm through UCT209-45mm, so shaft diameters from 12 to 45 mm are covered.
You will find these units on belt and chain conveyors, bucket elevators, mills, mixers, and transmission drives in food, cement, mining, and aggregate operations. Their job is to hold proper tension in the drive, taking up the stretch that develops in a chain or belt and limiting wear on sprockets and pulleys.
Selection starts with the shaft diameter and the chain or belt pitch. During installation, line the housing up with the transmission shaft and bolt the lugs to the base. The insert arrives pre-lubricated and sealed, so avoid solvent washing that could harm the seals. Set tension by sliding the housing along its slots, then confirm the shaft turns freely. Relubricating on a regular schedule with lithium grease helps extend service life.
PEER UCT housings can be swapped with other brands that share the same mounting standard and dimensions. For a replacement, compare shaft diameter, lug center distance, and overall height. Should the original part number not match, an insert from a different series with the same shaft diameter may work. MR Industrial Accessories LLC supplies the PEER brand and can help you identify the right equivalent.
To get a quote on a UCT take-up housing, send the full part number or the shaft size you need through WhatsApp or email. You can also ask about other insert bearing housing series. The team replies promptly with technical and commercial information.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does UCT stand for in a bearing housing?
- UCT designates a take-up housing that holds an insert bearing. The housing has side lugs for mounting and sliding adjustment. The T points to the take-up shape, and the number that follows specifies the insert size and shaft diameter. This is a standardized naming system for this mounting type.
- How do I pick the right UCT housing for my application?
- You need the shaft diameter, the chain or belt pitch, and the mounting dimensions. Those details point to the correct UCT part number. If you already have the original part number, send it via WhatsApp and we will quote that exact reference.
- Are PEER UCT housings interchangeable with other brands?
- Yes, PEER UCT housings use standardized dimensions and can be interchanged with other brands that follow the same standard. When replacing, verify the shaft diameter and the distance between lugs. MR Industrial Accessories LLC can tell you the compatible equivalent.