PEER UCSP203-17mm pillow block bearing
- Brand
- PEER
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
PEER UCSP203-17mm belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for UCSP203-17mm and any equivalents.
The PEER UCSP series is a mounted pillow block unit that pairs an insert bearing with a cast iron housing. The housing bolts to the structure and supports transmission shafts where a compact, self-aligning unit is required and mounting needs to stay simple.
Reading the designation helps when you order. UC refers to the insert bearing with set screws, SP to the split pillow block housing, and the trailing number gives the shaft size. Suffixes such as -12mm, -15mm and -17mm in UCSP201-12mm, UCSP202-15mm and UCSP203-17mm state the shaft diameter in millimeters. To request a quote, send the complete part number or the shaft size and locking configuration.
These units appear in conveyors, belts, elevators, mixers, fans, and agricultural or food machinery. They are common in packaging lines, mills and process equipment that call for a robust support which is easy to replace. The pillow block housing mounts on benches or structural profiles, with the shaft parallel to the support surface.
Selection depends on shaft diameter and length, radial and axial load, and the operating environment. The insert seal determines protection against dust and humidity, so match the seal type to the conditions. Lubricant is applied at the factory, but it is advisable to check its condition in service. During mounting, align the housing with the shaft and tighten the set screws onto the shaft without forcing, confirming that the bearing stays self-aligned.
Mounted units interchange between brands by part number and shaft size. If you bring a part number from another brand, we will identify the compatible equivalent. We can also quote the insert bearing separately if you already have the housing. Because interchangeability depends on the series and the locking type, confirm the complete designation before replacing.
To proceed with your inquiry, send the exact part number or size you need via WhatsApp. We quote the complete unit or the component you require and reply promptly.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does UCSP mean in this pillow block?
- UCSP identifies a pillow block unit with an insert bearing. UC stands for the insert bearing and SP for the split pillow block housing. The number after the letters indicates the shaft size, and suffixes like -12mm or -15mm confirm the diameter in millimeters.
- How do I choose the right size for my shaft?
- Measure the shaft diameter at the mounting position and check that it matches the suffix in the designation. Also consider the load and the working environment. If you are unsure, send us the size and equipment type via WhatsApp and we will quote the correct unit.
- Can another brand replace this unit?
- Yes, mounted units interchange between manufacturers by part number and shaft size. Send us the part number of the brand you use and we will tell you the compatible equivalent. Interchangeability depends on the series and locking type, so it is advisable to confirm the complete designation.