PEER UCPA210-32 pillow block bearing

PEER UCPA210-32 belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for UCPA210-32 and any equivalents.

A UCPA foot-mounted housing with a PEER insert bearing arrives as one assembled unit, ready to bolt onto a metal frame or bed. The insert carries a spherical outer ring, and the housing seat is shaped to match it, so the unit can absorb a small amount of misalignment. Typical jobs include conveyors, fans and agricultural equipment, where mounting needs to be straightforward and the shaft is not perfectly aligned. MR Industrial Accessories LLC quotes these units by part number through WhatsApp or email.

The letters UCPA point to a family of foot-mounted housings supplied with an insert bearing already fitted. What comes after tells you the size: UCPA201-8 and UCPA202-9 sit at the small end, while UCPA205-13 and UCPA205-14 are larger. The digits behind the hyphen give the shaft diameter in inches, and the different suffixes cover the commercial sizes in use. Include the full code when you ask for a quote so the correct equivalent can be identified.

You will find these units on belt conveyors, bucket elevators, mixers, fans and process equipment in food, chemical and materials plants. They also appear on road machinery and irrigation systems, provided the load stays moderate and the surroundings are not heavily corrosive. Quick mounting and periodic regreasing keep maintenance simple in those settings.

Selection comes down to three things: shaft diameter, the type of load and where the unit will work. The spherical seat of the insert takes up slight misalignment. Where dust or moisture is present, a version with reinforced sealing is the better choice. Grease goes in through the fitting on the insert, and regreasing should follow the duty cycle. At mounting, the base has to sit flat and the screws must be tightened properly to keep vibration down.

Insert bearing housing units can be swapped between brands when the main dimensions line up: shaft diameter, hole spacing, height to center and locking type. Before replacing, confirm the new housing has the same hole spacing and that the insert fits the existing shaft. If the part number on the component can no longer be read, the equivalent can be traced from its dimensions.

Send the part number or the shaft dimensions on WhatsApp and the exact unit will be quoted, along with a compatible alternative when one is needed.