PEER UCC207-35mm cartridge bearing

PEER UCC207-35mm belongs to cartridge bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for UCC207-35mm and any equivalents.

The PEER UCC is a mounted cartridge unit that pairs a ball bearing with an outer ring machined to a cylindrical outside surface. It seats into a bored hole and is held in place with screws, so the shaft turns while the unit stays fixed in the housing or wall. This design suits equipment running under moderate radial loads.

Reading the code is straightforward. UCC points to the cartridge series with a cylindrical outer ring. The three-digit block that comes next — 201 through 208 — sets the size, and larger numbers mean a bigger shaft and housing diameter. The millimeter figure in codes such as UCC201-12mm or UCC205-25mm states the shaft size directly: UCC204-20mm takes a 20 mm shaft, UCC208-40mm takes a 40 mm shaft. That format removes guesswork when you order.

Typical installations include conveyors, belts, elevators, mixers, blowers and process machinery where the bearing is fixed to a wall or flange. Plants in food processing, chemical production, cement and packaging rely on this mounting style. Because the unit drops into the housing bore and is secured with screws, changeouts are quick and downtime is short.

Selection starts with two checks: shaft diameter and housing dimensions. The insert bearing normally carries contact sealing that keeps grease in and dust out, so match the seal to the working environment. Many versions are lubricated for life, though harsh conditions call for a grease point. During installation, align the housing and shaft carefully to avoid parasitic axial loads and to support service life.

Cartridge units interchange across brands by designation and dimensions. When a code from another maker does not line up, compare shaft diameter, outside diameter and ring width. Send the original code and we will identify the compatible equivalent. The PEER UCC series covers common shaft sizes from 12 to 40 mm.

Have the code or the housing size ready? Send it by WhatsApp or email and we will quote the right unit, confirm an alternative, or help you adapt the mounting to a different housing.