PEER SUCHA206-18 hanger bearing

PEER SUCHA206-18 belongs to hanger bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for SUCHA206-18 and any equivalents.

A SUCHA hanger housing paired with a PEER insert bearing works as a mounted support point for rotating shafts. It bolts to a frame or structure rather than to a floor or wall, which makes it useful when a long shaft needs support somewhere in the middle of its run. MR Industrial Accessories LLC supplies this line and can help you match the right size to your equipment.

Reading the code is the fastest way to order the correct part. SUCHA names the hanger housing family, the digits that follow point to the insert bearing size, and the number after the hyphen gives the shaft diameter in sixteenths of an inch. So SUCHA204-12 is a 204 series bearing on a 12/16 inch shaft, and SUCHA205-16 is a 205 series bearing on a 1 inch shaft. The range runs from SUCHA201-8 through SUCHA205-16.

You will find these units on belt and roller conveyors, elevators, mixers, packaging lines and drive shafts in food, chemical and materials processing plants. Grain handling, feed milling and aggregate systems also rely on them. Because the housing hangs from a structure, it can carry a shaft where there is no wall or base to mount a standard pillow block, holding alignment and limiting deflection along the span.

Selection comes down to three things: shaft diameter, how the housing will be fixed, and the conditions around it. The insert bearing seal is what keeps dust and moisture out, so in washdown areas or where particles are present it pays to confirm which seal type you have. Correct lubrication and careful alignment between housing and shaft both affect how long the unit lasts, and the mounting has to let the bearing self-align so it can absorb small deviations.

Hanger housings with insert bearings are usually cross-referenced by series plus shaft diameter. Nomenclatures look similar from one brand to another, but mounting dimensions do not always match. If you are working from another brand's code or from a part you cannot identify, send it over and MR will point you to a compatible alternative or quote the exact size.

To get a quote, message the SUCHA code printed on your equipment, or simply the shaft size and housing type, through WhatsApp or email. The team answers promptly and can advise on equivalents and selection so the part fits your application.