PEER HCP213-40 pillow block bearing
- Brand
- PEER
- Category
- Bearing housings
- Subcategory
- Y-bearing unit
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
PEER HCP213-40 belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for HCP213-40 and any equivalents.
For maintenance and purchasing teams, the PEER HCP pillow block is a ready-to-mount unit that pairs a cast iron housing with an insert ball bearing. It supports rotating shafts where alignment and sealing matter. MR Industrial Accessories supplies the PEER line from Miami to customers across the United States and Latin America, and helps you match the right size to your shaft.
The HCP code points to a pillow block family with an insert bearing. The base number sets the size: HCP201-8, HCP202-9 and HCP202-10 sit at the small end, while HCP203-11, HCP204-12, HCP205-13, HCP205-14 and HCP205-15 take larger shafts. The digits after the hyphen define the insert bore, so two units with the same base can have different shaft diameters. Always quote the full part number.
Typical applications include belt conveyors, bucket elevators, mixers, mills, screens and process equipment in food, chemical and aggregate plants. They also show up in industrial fans, centrifugal pumps and agricultural machinery. In humid or dusty settings, the insert seals keep grease in and contaminants out, so inspect the seal lip during installation and avoid damaging it.
Selection depends on shaft diameter, radial and axial loads, and the operating environment. Lubricate through the housing fitting with a compatible grease. Aligning the housing to the shaft is critical: angular misalignment speeds up wear on both insert and seal.
PEER HCP pillow blocks interchange with other brands that share the same nomenclature and dimensions. If you have a competitor's part number, send it and we will identify the equivalent. Shaft diameter, mounting hole spacing and height to center are the dimensions to confirm.
To get a quote, send the HCP number from the nameplate or old bearing via WhatsApp or email. If it is not available, provide the shaft diameter and pillow block dimensions. We reply promptly and can suggest equivalents and help you choose.
Dimensions
Dimensions and tolerances: Message us the part number on WhatsApp and we'll verify its dimensions and version with the manufacturer's datasheet.
Frequently asked questions
- What does the suffix in an HCP part number indicate?
- The suffix after the hyphen gives the insert bore size, which sets the shaft diameter. For instance, HCP205-13 and HCP205-14 use the same housing but accept different shafts. Send the complete part number for an exact quote.
- How do I lubricate HCP pillow blocks?
- Add grease through the fitting on the housing. Use a medium-consistency grease compatible with what is already in the insert, and do not mix different bases. Adjust the interval to the duty cycle and environment; shorten it under severe conditions.
- Can I replace another brand's pillow block with a PEER HCP unit?
- Yes, PEER HCP follows standard nomenclature and dimensions, so it interchanges with other brands using the same designation. Send the other brand's part number and we will confirm the equivalent. Match shaft diameter and mounting dimensions.