PEER HCP206-30mm pillow block bearing

PEER HCP206-30mm belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for HCP206-30mm and any equivalents.

PEER Y-bearing pillow blocks with insert bearings arrive as one assembled unit: the housing and the insert are already matched. They suit rotating shafts that need straightforward mounting, alignment and relubrication. You will find them on conveyors, agricultural implements and process lines. MR Industrial Accessories supplies this PEER line and can help you match the right code to your shaft diameter.

Reading the HCP code is simple. The three digits after HCP point to the insert size, and when the mm suffix is present, the last two digits give the shaft diameter in millimeters. So HCP201-12mm fits a 12 mm shaft, and HCP205-25mm fits a 25 mm shaft. The mm suffix confirms metric measurement. Each code ships as a complete assembly, so you do not need to order the housing and insert separately. If you are unsure of your shaft size, send us the code or the measurement.

Typical duty includes belt and roller conveyors, mixers, screens, fans, bucket elevators and general process equipment. In agriculture, seeders, harvesters and storage plants use them. Food and chemical operations place them on packaging lines and pumps. Two bolts hold the housing to a flat base, while the insert's inner ring grips the shaft. This makes the unit a practical choice where dust, moisture or washdown are present.

Start your selection with the shaft diameter and the load direction, which is mostly radial in these units. Make sure the mounting surface is rigid and aligned; a base that is not flat will speed up wear. Inserts commonly come with labyrinth or contact seals and can be relubricated. During installation, tighten the inner ring set screws to the recommended torque and check that the shaft turns freely. Under high vibration, inspect the fit at regular intervals.

Other manufacturers use different designations for Y-bearing pillow blocks with insert bearings. Their locking method, sealing arrangement or insert tolerance may not match. When you replace a unit, compare shaft diameter, overall height and mounting hole diameter. Send the original part code or a photo with measurements, and we will point you to a compatible option from PEER or another brand we carry.

MR Industrial Accessories supplies the PEER Y-bearing pillow block line. To get a quote, message us on WhatsApp with the code or shaft measurement. We can also answer questions about mounting and lubrication.