PEER GRP211-55mm pillow block bearing

PEER GRP211-55mm belongs to pillow block bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for GRP211-55mm and any equivalents.

The PEER GRP Y-bearing housing is a pillow block unit that combines a cast iron housing with an insert ball bearing. It supports rotating shafts in applications where alignment may vary and loads are moderate. MR Industrial Accessories LLC supplies this series for maintenance and OEM needs across the US, Canada, Mexico and South America.

Part numbers follow the format GRP followed by a number and the shaft size in millimeters, such as GRP204-20mm, GRP205-25mm, GRP206-30mm, GRP207-35mm, GRP208-40mm, GRP209-45mm, GRP210-50mm and GRP211-55mm. The number increases with bearing size, and the suffix indicates the shaft diameter. For example, GRP208-40mm fits a 40 mm shaft.

These units are common in belt conveyors, bucket elevators, packaging lines, mixers, fans and agricultural equipment. In dusty or wet environments like food processing, cement, aggregate and water treatment plants, the insert seal helps keep lubricant in and contaminants out. They also suit material handling and general production machinery.

Selection starts with the shaft diameter, load type and operating environment. Inserts typically have labyrinth or contact seals; extra protection may be needed in heavy contamination. Mount on a flat, rigid surface, tighten bolts evenly and align the shaft. If the insert has a grease fitting, replenish lubricant through it as needed.

Y-bearing housings with insert bearings from different brands often share standardized dimensions, so interchangeability is possible. If you have a part number from another brand or an unidentified unit, send it to MR and we can suggest a compatible equivalent. Verify shaft diameter, bolt hole spacing and insert fixing type before replacing.