PEER GRC210-50mm cartridge bearing

PEER GRC210-50mm belongs to cartridge bearing, part of our Bearing housings range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for GRC210-50mm and any equivalents.

This Y-bearing housing with a PEER GRC series insert bearing is a cartridge-style unit that combines a cartridge outer ring and an insert ball bearing, ready to mount on a shaft and in a housing. It guides rotating shafts in equipment that needs straightforward mounting and some alignment capability. MR Industrial Accessories LLC supplies this line to customers throughout the United States and in several Latin American countries.

The code after GRC tells you the insert size and, therefore, the shaft diameter. The progression is clear: GRC204-20mm, GRC205-25mm, GRC206-30mm, GRC207-35mm, GRC208-40mm, GRC209-45mm, GRC210-50mm and GRC211-55mm. As the number rises, so does the shaft diameter. The millimeter suffix is the bore of the insert, so the full designation identifies the shaft the unit accepts. Send that code as-is when you request a quote.

You will find these units on belt conveyors, bucket elevators, packaging belts, mixers, fans and process lines in food, chemical and bulk material plants. They suit shafts turning at moderate speeds under moderate loads. The cartridge shape mounts into cylindrical housings or split plummer block housings, and the self-aligning design absorbs small shaft misalignments.

Selection comes down to shaft diameter, load type and the environment. The insert sealing determines whether the unit handles dust, humidity or frequent washdowns; dirtier conditions call for more closed protection. Lubrication is applied at the factory and may need replenishing with compatible grease depending on use. Before mounting, confirm the housing is clean and free of burrs, the shaft is not worn in the support area, and alignment is correct so the insert is not overloaded.

Cartridge mounted bearings interchange between manufacturers by series number and shaft size, so a unit from another brand with the same diameter and configuration can replace the PEER bearing. Compare the complete designation, shaft diameter and sealing type. Bring the original part code or a photo of the nameplate, and we will identify the equivalent PEER reference and quote it.

To replace a Y-bearing housing with a PEER GRC insert bearing, send the complete code or the shaft size you use by WhatsApp or email. We will quote the exact reference and reply promptly.