V-belt Optibelt XPZ 950
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPZ
- Series
- Super X-Power M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT XPZ 950 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for XPZ 950 and any equivalents.
When the marking on the old belt is worn or hard to read, start with the profile and length. This Optibelt XPZ 950 is a cogged narrow V-belt in the Super X-Power M=S series, with an XPZ profile and a 950 mm length. The same size is also listed under Gates XPZ 950.
The marking on the back of a belt is the fastest way to identify a replacement. Look for the profile and length together: XPZ and 950 mm. If the original belt is gone or the print has rubbed off, measure the outside length and compare it with the 950 mm figure, then confirm the profile is XPZ. A belt with the wrong profile can sit incorrectly in the pulley groove, so the two values matter equally.
This Optibelt Super X-Power M=S belt is a cogged narrow V-belt. The cogged construction is typical of this series, and the XPZ profile places it in the narrow V-belt family. When you replace a belt on a drive with multiple belts, fit a complete set of the same profile and length so the load is shared evenly. Mixing a new belt with worn belts can leave the new one carrying more than its share.
For a quote, send the part number Optibelt XPZ 950, or the marking from the old belt. If the belt is not readable, send the profile and length you measured, plus a photo of the drive and the pulley grooves. The team can confirm the belt or suggest an equivalent. The same size is also listed under Gates XPZ 950.
Dimensions
- Section
- XPZ
- Length
- 950mm
Frequently asked questions
- How do I read the marking on an Optibelt XPZ 950?
- The marking shows the profile and length. On this belt, the profile is XPZ and the length is 950 mm. Use both values when comparing with the old belt.
- What if the marking on my old belt is worn off?
- Measure the outside length and check the profile against the pulley groove. The replacement should be an XPZ profile with a 950 mm length. Send a photo of the drive if you are unsure.
- Is the Optibelt XPZ 950 the same as Gates XPZ 950?
- The same size is also listed under Gates XPZ 950. Both are XPZ profile belts with a 950 mm length. Confirm the profile and length on your drive before ordering.