V-belt Optibelt XPZ 800 XEP
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPZ
- Series
- Super XE-Power Pro M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT XPZ 800 XEP belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for XPZ 800 XEP and any equivalents.
The Optibelt XPZ 800 XEP is a cogged narrow V-belt in the Super XE-Power Pro M=S series. Its XPZ profile and 800 mm length define where it fits, so the two values on the belt back are the first thing to confirm against the drive. We carry this belt and quote it by part number.
Cogged narrow V-belts are common on compact, high-speed drives where a standard wrapped belt would run too hot or slip: pumps, fans, compressors, small conveyors, machine tool spindles and similar auxiliary drives. The molded cogs improve flexibility around small pulleys and help the belt run cooler in tight, fast layouts.
To confirm fit, read the marking on the back of the old belt and match both the profile and the length. XPZ sets the cross-section and the pulley groove it seats in; 800 mm sets the outside length. A belt with the same profile but a different length will not tension correctly, and a belt with the same length but a different profile will not sit properly in the groove.
When you request a quote, send the part number XPZ 800 XEP along with the drive it serves and the pulley diameters if you have them. If the old belt is worn or the marking is unreadable, a photo of the belt back and the pulley grooves is usually enough for our team to confirm the right belt or suggest an equivalent.
Dimensions
- Section
- XPZ
- Length
- 800mm
Frequently asked questions
- How do I confirm this belt fits my drive?
- Read the marking on the back of the belt you are replacing. It should show the XPZ profile and a length of 800 mm. If both match the Optibelt XPZ 800 XEP, the belt is the same size. If the length differs, the belt will not tension correctly even though the profile looks right.
- What should I send with my quote request?
- Send the part number XPZ 800 XEP, the equipment or drive the belt runs on, and the pulley diameters if you have them. A photo of the old belt back and the pulley grooves helps if the marking is worn or hard to read.
- Where is a cogged narrow V-belt like this used?
- Cogged narrow V-belts are used on compact, high-speed drives such as pumps, fans, compressors, small conveyors and machine tool spindles. The cogged construction improves flexibility around small pulleys and helps the belt run cooler than a wrapped belt in the same layout.