V-belt Optibelt XPZ 2800
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPZ
- Series
- Super X-Power M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
OPTIBELT and STARK: matching part numbers →GATES and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT XPZ 2800 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for XPZ 2800 and any equivalents.
The Optibelt XPZ 2800 is a cogged narrow V-belt in the Super X-Power M=S series. It has an XPZ profile and a length of 2800 mm. Before you fit a new belt, inspect the drive and sheaves.
A worn belt is often only one part of the problem. Check sheave grooves for wear, rust or embedded debris, and confirm that the sheaves are aligned and securely mounted. Worn grooves can cause a new belt to sit too deep, slip and wear quickly, so correcting the drive first helps the replacement perform as intended.
Verify that the drive is stopped and locked out before you remove the old belt. Inspect the sheaves for cracks, chipped edges or excessive runout, and replace any damaged components. Clean the grooves and check that the belt tensioning system moves freely. When you fit the Optibelt XPZ 2800, follow the drive manufacturer's tensioning procedure and recheck tension after the initial run-in.
The same size is also listed under Stark XPZ 2800 and Gates XPZ 2800. If you are replacing a belt on a drive that uses multiple belts, inspect all of them and replace the set together. Send the part number, the belt marking and the drive details by WhatsApp or email to request a quote.
Dimensions
- Section
- XPZ
- Length
- 2800mm
Frequently asked questions
- What should I check on the drive before fitting this belt?
- Inspect the sheaves for wear, rust, cracks and alignment, and make sure the tensioning system works freely. Clean the grooves and replace any damaged components before installing the new belt.
- Can I replace just one belt on a multi-belt drive?
- On a drive that uses multiple belts, it is good practice to replace the full set at the same time so the belts share the load evenly. Check the condition of all belts and sheaves before ordering.
- How do I request a quote for the Optibelt XPZ 2800?
- Send the part number, the belt marking and any drive details by WhatsApp or email. The team will confirm the belt and reply promptly.