V-belt Optibelt XPZ 2360
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPZ
- Series
- Super X-Power M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
OPTIBELT and STARK: matching part numbers →GATES and OPTIBELT: matching part numbers →
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT XPZ 2360 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for XPZ 2360 and any equivalents.
The Optibelt XPZ 2360 is a cogged narrow V-belt from the Super X-Power M=S series. The XPZ profile and 2360 mm length are the two figures to match when you are choosing a replacement. This page covers what those values tell you on a drive.
The XPZ profile sets the belt's cross-section, so it is the first thing to check against the pulley groove. A belt in this profile is a narrow V-belt, and the cogged construction is the form Optibelt uses in the Super X-Power M=S series. If the belt you are replacing is marked XPZ, this is the profile to specify.
The 2360 mm length is the datum you match to the drive. Confirm it against the marking on the back of the old belt rather than measuring around the outside, since a worn belt can read short. The same size is also listed under Stark XPZ 2360 and Gates XPZ 2360 if you are comparing what is on the shelf.
For a quote, send the part number XPZ 2360, the quantity, and the application if you have it. If the marking is worn or the drive has been changed, send the profile and length you measured and the team can confirm the right belt or suggest an equivalent.
Dimensions
- Section
- XPZ
- Length
- 2360mm
Frequently asked questions
- What do the XPZ profile and 2360 mm length mean for my drive?
- XPZ is the cross-section that must match the pulley groove, and 2360 mm is the length that must match the drive layout. Both figures need to agree with the belt you are replacing.
- How do I confirm the length before ordering?
- Read the marking on the back of the old belt. If it is worn away, measure the profile and length you need and send those with your request.
- What should I send for a quote?
- Send the part number XPZ 2360, the quantity you need, and the drive details if you have them. The team replies by WhatsApp or email and can confirm the belt or suggest an equivalent.