V-belt Optibelt XPZ 1537
- Brand
- OPTIBELT
- Category
- Power transmission
- Subcategory
- V-belts
- Section
- XPZ
- Series
- Super X-Power M=S
We reply promptly.
Tell us the quantity you need and request a quote by WhatsApp or email.
Other brands for this category
Ask us for alternatives. We check every equivalent against the part number and your application.
Can't find the exact model? Tell us the part number or model you need. We'll track it down and quote it, whether or not it appears in our catalog.
Description
OPTIBELT XPZ 1537 belongs to v-belt, part of our Power transmission range. Tell us how many you need by WhatsApp or email and we'll get back to you promptly with a quote for XPZ 1537 and any equivalents.
The Optibelt XPZ 1537 is a cogged narrow V-belt from the Super X-Power M=S series, with an XPZ profile and a length of 1537 mm. When replacing a belt on a driven machine, the most reliable starting point is the belt you are removing. Read the marking on the back of the old belt and compare it directly with this listing.
The marking on a worn belt can be difficult to read after service. Clean the back of the belt and look for the profile and length; on this belt those are XPZ and 1537 mm. If the old marking is worn away, measure the outside length of the belt and confirm the cross-section before ordering. The same size is also listed under Gates XPZ 1537, so you may find that number on the belt you are replacing or in your plant records.
A cogged narrow V-belt is used where a standard wrapped belt may not suit the pulley diameter or the drive layout. Confirm that the replacement matches the old belt in profile, length and construction before installation. If the drive runs more than one belt, inspect all belts on the drive at the same time and replace them as a set so the load is shared evenly.
Dimensions
- Section
- XPZ
- Length
- 1537mm
Frequently asked questions
- How do I confirm this is the correct replacement belt?
- Check the marking on the back of the belt you are replacing. The profile should read XPZ and the length 1537 mm. The same size is also listed under Gates XPZ 1537. If the marking is unreadable, measure the old belt and compare the cross-section.
- What should I send to request a quote?
- Send the part number, XPZ 1537, and the quantity you need. If you are unsure of the part number, send the marking from the old belt or a photo of it, along with the drive details. We will confirm the belt or suggest an equivalent.
- Can I replace just one belt on a multi-belt drive?
- On a drive that uses several belts, replace them as a set. Mixing a new belt with worn belts can cause uneven load sharing. Inspect the pulleys and the rest of the drive at the same time.